Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Who can identify what this is? (http://www.chiefdelphi.com/forums/showthread.php?t=115799)

jwallace15 05-04-2013 20:48

pic: Who can identify what this is?
 

Aren_Hill 05-04-2013 20:48

Re: pic: Who can identify what this is?
 
a jag out of its case...

connor.worley 05-04-2013 20:49

Re: pic: Who can identify what this is?
 
It's a Jag.

orangemoore 05-04-2013 20:50

Re: pic: Who can identify what this is?
 
Quote:

Originally Posted by Aren_Hill (Post 1257625)
a jag out of its case...

I think your right.

MDAWG25 05-04-2013 20:52

Re: pic: Who can identify what this is?
 
Not only is it a jaguar out of its case, its a TAN* jaguar out of its case and without it's fan!

Ether 05-04-2013 20:54

Re: pic: Who can identify what this is?
 
It's a TAN Jag.

[edit] MDAWG25 beat me to it

... with 12 FDP8874 FETs



Arrowhead 05-04-2013 20:58

Re: pic: Who can identify what this is?
 
I beg to differ, that is a BD967F colored jag

coalhot 05-04-2013 20:59

Re: pic: Who can identify what this is?
 
Hmmmm, cool. I popped one open before. Am wondering why you opened it though: when I blew one out, the FET's were completely melted/had blown up.

I have a feeling I messed up more then the FET's on mine... :o

jwallace15 05-04-2013 21:20

Re: pic: Who can identify what this is?
 
Quote:

Originally Posted by MDAWG25 (Post 1257629)
Not only is it a jaguar out of its case, its a TAN* jaguar out of its case and without it's fan!

Ding Ding Ding Ding Ding! Congratulations!

Special recognition goes to Ether!

Quote:

Originally Posted by coalhot (Post 1257633)
Hmmmm, cool. I popped one open before. Am wondering why you opened it though: when I blew one out, the FET's were completely melted/had blown up.

I took this one apart because it was labelled bad in testing. I'm not sure what was wrong with it, though.

Igreenman 05-04-2013 21:48

Re: pic: Who can identify what this is?
 
It looks like electronics. :D

Alan Anderson 05-04-2013 22:59

Re: pic: Who can identify what this is?
 
I saw the picture and immediately said "It's the inside of a Jaguar, duh."

Out loud.

In the presence of others.

It only took me a couple of seconds to realize how silly it sounded out of context.

MattC9 05-04-2013 23:06

Re: pic: Who can identify what this is?
 
Ahhhh it still has the luminary micro stamp on the chip...

Kevin Sevcik 05-04-2013 23:11

Re: pic: Who can identify what this is?
 
Quote:

Originally Posted by Alan Anderson (Post 1257685)
I saw the picture and immediately said "It's the inside of a Jaguar, duh."

Out loud.

In the presence of others.

It only took me a couple of seconds to realize how silly it sounded out of context.

Hah! My wife wasn't the least bit confused when I asked aloud "Why am I looking at a naked Jaguar?"

Ekcrbe 05-04-2013 23:25

Re: pic: Who can identify what this is?
 
Quote:

Originally Posted by coalhot (Post 1257633)
Hmmmm, cool. I popped one open before. Am wondering why you opened it though: when I blew one out, the FET's were completely melted/had blown up.

I have a feeling I messed up more then the FET's on mine... :o

We here at Truck Town have a history of killing Jaguars softly--no audible or visible damage. This one we found in a drawer attached to the main table in our electrical area back in the fall of 2011. It had masking tape with "BAD?" written on it on the bottom. We tried it, it was indeed "bad" (I think it just always output 0), and we put it back in the drawer, until now I suppose.

We also gave both sides of a Black Jag power from the PDB while working on our 2012 practice board, and when we noticed that Jaguar's status LED wasn't on, we followed both pairs of wires coming from it back to adjacent slots in the power distribution board. Nothing noticeable happened when we powered it on, but swapping it out with another and wiring it properly solved that.

Kevin Sevcik 05-04-2013 23:32

Re: pic: Who can identify what this is?
 
Quote:

Originally Posted by Ekcrbe (Post 1257699)
We also gave both sides of a Black Jag power from the PDB while working on our 2012 practice board, and when we noticed that Jaguar's status LED wasn't on, we followed both pairs of wires coming from it back to adjacent slots in the power distribution board. Nothing noticeable happened when we powered it on, but swapping it out with another and wiring it properly solved that.

This is officially on my Top Ten Unlikely Wiring Mistakes. Because wiring it properly and backwards at the same time is pretty impressive.


All times are GMT -5. The time now is 05:10.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi