25# Sprockets
 

Hi,
Are there teams that make their own sprockets?
if so;
What type of metal and width?
Do you have any CAD to show examples?
do you have any tips?

Re: 25# Sprockets
 

Is there a particular reason you want to make your own sprockets? Doing so requires either a CNC machine, rotary table, or indexing head.

Re: 25# Sprockets
 

We've cut a few in a pinch on our router in a pinch. They're pretty quick to cut, and we've always just used the largest cutter that fits in the tooth. We've cut both #25 and #35.

With how cheap they are from AndyMark and Vex, we prefer to buy them whenever possible.

Re: 25# Sprockets
 

Yes, we have a factory that can make it. The reason is that it will save us a lot of time and money. We are from Israel and we have to pay 40% more on everything from ths US (taxes, customs, shipment) and it takes about 2 weeks of shipment...

Re: 25# Sprockets
 

I'd advise going to a bicycle shop instead. Or converting over to timing belts. Or buying Eagle V-Belting from Fenner Drive and using V-sheaves so that you can choose your custom lengths and make much simpler rotating parts.

However, if you want (or need) to make your own sprockets, I would recommend downloading the Martin catalog PDFs (http://www.martinsprocket.com/suppor...atalog-online). The materials and dimensions of the sprockets should all be in there. You should be able to fabricate your sprockets from there.

One recommendation would be to use a hardenable steel and flame-harden the teeth. A lot of sites abound on the web that can advise you how do do it properly. As always, safety first ... ::ouch::

Re: 25# Sprockets
 

As mentioned above, most teams don't do it due to the fact that AM (and similar) sprockets are so readily available and cheap. I am sure, however, that there are a few teams out there that do it just for giggles.

It is relatively light on the design process. Drawings for the sprockets are readily available online from various sources. Drawings can also be done easily with a tool in inventor (don't ask me how, but I've seen it done).

Once you have your design, you have to choose your manufacturing process. A popular method is to use a waterjet to cut them out of a sheet of 6061 aluminum that is .125 of an inch thick. I prefer the waterjet idea as it allows you to make a lot of them at one time and minimizes machine time.

Re: 25# Sprockets
 

This is all true, but is way overkill.

Sprockets for FRC use can be cut by just about any 2d method (CNC router, mill, waterjet, laster) into 6061 Aluminum plate and be just fine. The cut time isn't crazy high to do so either.

Re: 25# Sprockets
 

I know of a few teams that make their own sprockets (for various reasons), and to ease the manufacturing process make the sprockets from .090 thick gears. By doing this the gears don't need the taper (chamfer) on the teeth.

Typical materials would include 6061-T6 and 7075-T6 for aluminum.

Re: 25# Sprockets
 

Is aluminum strong enough for the shocks? I'm having a little trouble picturing one of our drivetrains using aluminum sprockets and steel chains surviving a season, especially since we're in a district (about 50 matches if you do well through district championships). :yikes:

Re: 25# Sprockets
 

Yes, we had 16T #25 aluminum (7075) sprockets on 6" wheels this year, that's a very high tooth load.

Pretty much any plate sprocket (the smallest available from vex/andymark is 32T #25) will be strong enough unless the wheels are massive. As in 12"+.

Re: 25# Sprockets
 

We machined 22 tooth #25 sprockets from 7075-T6 bar stock due to the quantity we needed. Took probably 10 minutes apiece including hex broaching. Saved hundreds of dollars doing it ourselves. Had to play with cutter comp for chain fitment. Had trouble finding accurate CAD.

Re: 25# Sprockets
 

Where did you try getting CAD from?

Solidworks or Inventor Built in generators?

-RC

Re: 25# Sprockets
 

for $5 each, I'm surprised you did this! That's a crazy amount of work to avoid a $5 sprocket.

Re: 25# Sprockets
 

Thanks!
We will probably make a few in order to learn how to do it, and then we will decide if it worth the time

Re: 25# Sprockets
 

More like $12 each. Hubbed sprockets. It's only probably $2 of bar stock so there's some savings. Not much trouble at all in a VMC. On a router I wouldn't bother.