LabVIEW Start-Up Question
 

I recently installed LabVIEW onto a new computer to use for off-season and next year.

However, when I open LabVIEW, the start up screen whre you select the file you want to open or the template you want to start from looks very different than the one I am used to. Is this normal or am I missing an update somewhere?


Thanks!

Yes. http://wpilib.screenstepslive.com/s/...w-for-frc-2013

Re: LabVIEW Start-Up Question
 

Yay thanks! That worked:)

Re: LabVIEW Start-Up Question
 

BUMP

I ran into this problem again this year...I can never manage to find the website where the updates are. Please help, thanks.

Re: LabVIEW Start-Up Question
 

This should be what your looking for.

https://decibel.ni.com/content/commu...mpetitions/frc

Re: LabVIEW Start-Up Question
 

I got to that page but I couldn't find any updates

Re: LabVIEW Start-Up Question
 

This might be it.

https://decibel.ni.com/content/docs/DOC-34731

Re: LabVIEW Start-Up Question
 

Also checked that page haha

It only explains how to install LabVIEW, not run updates

Re: LabVIEW Start-Up Question
 

You download the update, extract the file, and then you run the setup application in the folder you extracted. It should then run the update software.

Re: LabVIEW Start-Up Question
 

Okay, I noticed a link to the instructions for the update installer and it finally brought me where I needed to go! Thanks:)

Re: LabVIEW Start-Up Question
 

I'm glad to hear its working out.

Good Luck this Season!
::safety::