Chief Delphi - Frisbee Stack Height

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Frisbee Stack Height (http://www.chiefdelphi.com/forums/showthread.php?t=118071)

DampRobot

29-07-2013 03:42

Frisbee Stack Height

I'd usually just go into the shop and measure something like this, but I'm on vacation and I'm doing some time-sensitive CAD.

Does anyone remember the height of a stack of four nested frisbees? We want to know how high they'll sit in a hopper to a fair degree of accuracy.

Woolly

29-07-2013 04:17

Re: Frisbee Stack Height

Quote:

Originally Posted by DampRobot (Post 1285093)

Off the top of my head, the 1.25" per disc gets you to 5", but if I remember right, 4.5" was tall enough for our bucket hopper.
If you had a CAD of a frisbee, you could stack them in inventor and find out.

BrendanB

29-07-2013 10:23

Re: Frisbee Stack Height

Quote:

Originally Posted by Woolly (Post 1285094)

But each frisbee sits inside each other when stacked.

HumblePie

29-07-2013 11:43

Re: Frisbee Stack Height

Quote:

Originally Posted by DampRobot (Post 1285093)

Well, I walked down to the shop and nested 4 frisbees as nicely as I could, and measured 103mm to the crown of the top frisbee. YMMV (albeit slightly).

DampRobot

29-07-2013 13:06

Re: Frisbee Stack Height

Quote:

Originally Posted by HumblePie (Post 1285132)

Well, I walked down to the shop and nested 4 frisbees as nicely as I could, and measured 103mm to the crown of the top frisbee. YMMV (albeit slightly).

Thank you! That was exactly what I was looking for.

All times are GMT -5. The time now is 12:34.