![]() |
26 Rules for FRC Design
I found an interesting list on Dave Akin's website last night that resonated fairly well within the FRC Community. Akin is currently a Professor of Aerospace Engineering at the University of Maryland, and was a Professor of Aerospace engineering at MIT prior to that. I've shortened and amended his original List, Akin's Laws of Spacecraft Design, to create a more succinct and relevant list of important FRC Design "rules." This is all meant in good fun, although there is a lot of truth in this list. I encourage everyone to take the time to read Akin's original list too, it's pretty spot on.
The 26 Rules for FRC Design 1. Engineering is done with numbers. Analysis without numbers is only an opinion. 2. To design a robot right takes an infinite amount of effort. That’s why it's a good idea to design them to operate when some things are wrong. 3. Design is an iterative process. The necessary number of iterations is one more than the number you have currently done. This is true at any point in time. 4. Your best design efforts will inevitably wind up being useless in the final design. Learn to live with the disappointment. 5. In nature, the optimum is almost always in the middle somewhere. Distrust conclusions that claim the optimum is at an extreme point. 6. Not having all the information you need is never a satisfactory excuse for not starting the analysis. 7. When in doubt, estimate. In an emergency, guess. But be sure to go back and clean up when the real numbers come along. 8. Sometimes, the fastest way to get to the end is to throw everything out and start over. 9. There is never a single right solution, but there are always multiple wrong ones. Good design is having the forethought to distinguish these from the rest. 10. Design is based on requirements. There's no justification for designing something one bit "better" than the requirements dictate. 11. (Edison's Law) "Better" is the enemy of "good". 12. The fact that an analysis appears in print/online has no relationship to the likelihood of its being correct. 13. Past experience is excellent for providing a reality check. Don’t let a poor experience doom an otherwise worthwhile design, though. 14. The odds are greatly against you being immensely smarter than everyone else in the field. If your analysis says your terminal velocity is twice the speed of light, you may have invented warp drive, but the chances are a lot better that you've screwed up. 15. A bad design with a good presentation is doomed eventually. A good design with a bad presentation is doomed immediately. 16. Half of everything you hear on Chief Delphi is crap. Experience is figuring out which half is which. 17. The schedule you develop will seem like a complete work of fiction up until the time you have to bag the robot without meeting it. 18. It's called a "Work Breakdown Structure" because the Work remaining will grow until you have a Breakdown, unless you enforce some Structure on it. 19. (Montemerlo's Law) Don't do nuthin' dumb. 20. (Varsi's Law) Schedules only move in one direction. 21. (Law of Demonstrations) When the hardware is working perfectly, there are no scouts watching your match. 22. (Roosevelt's Law of Task Planning) Do what you can, where you are, with what you have. 23. (de Saint-Exupery's Law of Design) A designer knows that he has achieved perfection not when there is nothing left to add, but when there is nothing left to take away. 24. Any run-of-the-mill engineer can design something which is elegant. A good engineer designs systems to be efficient. A great engineer designs them to be effective. 25. Capabilities drive requirements, regardless of what the systems engineering textbooks say. 26. FRC is an unforgiving environment. If you screw up the engineering, it is impossible to succeed. (and there's no partial credit because you almost made it to Einstein...) |
Re: 26 Rules for FRC Design
Thank you. I think I'm printing these out and putting them in the shop somewhere.
|
Re: 26 Rules for FRC Design
Most of these sound like things I've learned from JVN, Adam Heard, and Cory McBride while reading CD!
|
Re: 26 Rules for FRC Design
Brilliant. For those don't have the required experience for #16: This isn't crap. This is the good stuff.
|
Re: 26 Rules for FRC Design
You missed the best one!
29. (von Tiesenhausen's Law of Program Management) To get an accurate estimate of final program requirements, multiply the initial time estimates by pi, and slide the decimal point on the cost estimates one place to the right. Quote:
|
Re: 26 Rules for FRC Design
love this
|
Re: 26 Rules for FRC Design
Quote:
I have no qualms with the other 25 points listed. |
Re: 26 Rules for FRC Design
Quote:
|
Re: 26 Rules for FRC Design
Quote:
|
Re: 26 Rules for FRC Design
Quote:
|
Re: 26 Rules for FRC Design
Quote:
By the way, who comes up with these names ("de Saint-Exupery's Law of Design")? The fact that they seem so formal and establishment-sounding makes it so much funnier! |
Re: 26 Rules for FRC Design
[Relevant background to my upcoming comment: My last name is Coulombe.]
My kids (especially the ones who have had physics) have begun keeping track of "sage" things I say during the year and have dubbed them "Coulombe's Laws" #1 above is very close to a favorite of mine: "Do the math!" |
Re: 26 Rules for FRC Design
Quote:
|
Re: 26 Rules for FRC Design
Quote:
Quote:
|
Re: 26 Rules for FRC Design
Quote:
Too many teams stick with the idea they came up with at kick-off and never know when to give up on something. I've sawzalled our robots to start over more than I'm willing to admit, but I think you have to be willing to completely scrap your ideas once you know your ideas won't work and you see the right way to go. |
Re: 26 Rules for FRC Design
Quote:
staring at every part individually asking "do you need to exist?" |
Re: 26 Rules for FRC Design
Thanks for customizing and documenting this. Do you mind if we borrow this and use it? We will give credits to you and Mr.Akin. Thanks.
|
Re: 26 Rules for FRC Design
Everyone should feel free to use this list, just as long as they give due credit to Dr. Akin and his original list.
|
| All times are GMT -5. The time now is 17:29. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi