![]() |
Off season skills: Learn how to Solder
Just got back from our learn how to solder day. Passed out 17 kits, only 15 stayed to build. Youngest was 10, oldest early 20's but the average age was 14. Almost every builder had a parent to help. Combo of our VEX and FRC roboteers.
Final goal was to build this kit: Minimatrix 8*8 LED scrolling display We spread the parts on the table (pick up a 1 gal re-closeable zip lock storage bag, put into the bag the following: practice resistors, practice capacitors, practice boards, 3 batteries, remote, Minimatrix kit, pliers, iron, length of solder, clippers, instructions, and a paper towel). Take all to table, take paper towel fold it into 1/8's and get it damp. Opened up with standard safety lecture on how hot the irons get, how hot solder really really hurts, etc. Then a quick demo on how to solder. (Heat the joint, then feed solder into it). Roboteers then practiced with resistors on a single sided protoboard. With 6 good connections they got promoted to a double sided board, 4 good connections they were on to the Minimatrix kits. Most roboteers finished the test runs in 30 mins, and got the kit done in 20-35 mins. Three fails, one on not soldering the (-) connection on the battery, two with bent battery connectors. Easy fixes. All 15 roboteers left with working systems that they had programmed to spell out their names. And only two other minor issues, one kid burned the table with an iron and one Mom got a minor burn by not thinking that the metal shaft also gets hot. So all in all a successful day, roboteers were excited and had leaned a new skill. Thanks to parents that stayed to monitor/cheer on their roboteers and to Scott for supplying practice components and boards. Total cost for items was $21 per kit, shipping adds another $6 per kit if you decide to reproduce our event. Battery life in the units is ~30 hours of active use, Digikey has 2032's in stock for 30cents each, but shipping is expensive. The irons and tools came from Marlin P Jones in Florida, my goto guy for surplus stuff. Nick, the builder of the Minimatrix was great on geting a mixed order of displays over to me from England. |
Re: Off season skills: Learn how to Solder
Awesome! My team has been looking into a soldering training class, as we(ok, mainly me) want to get more members involved with electrical. We taught a few students to solder when we made our own light-up team number signs for champs. It was a lot of work (over 700 solder joints) but everyone involved loved it. It was a good training opportunity and a great social opportunity for newer members.
(edit) anyone have suggestions for cheap soldering kits? Especially ones with medium to large joints like those that students will be using on the bot? |
Re: Off season skills: Learn how to Solder
We do something very similar as part of our summer camp. Each kid spends two days (for a total of 4 hours) at each station. It's not as focused as yours sounds - we spend time talking about the robot and how the electrical system goes together as well as making the our own kits (the camp is for prospective members, not just anyone).
We get our kits from http://www.apogeekits.com/ - I've had an excellent experience with them every time - twice now the kit we had at the top of our list wasn't available in the quantities we wanted, and they offered a different (more expensive) kit at a discount to match the price of the original order. (Note: I have no affiliation with them other than as a customer with 3 orders over the past 3 years) We have the kids practice soldering initially with small scraps of wire. They typically end up making themselves little "electrical bracelets" with different colors of wire they can wear the rest of the camp. |
Re: Off season skills: Learn how to Solder
Quote:
|
Re: Off season skills: Learn how to Solder
Quote:
And as for lead free solder, I don't use it. Ever. That stuff is terrible. Wrecks the tips of the irons too. |
Re: Off season skills: Learn how to Solder
Quote:
|
Re: Off season skills: Learn how to Solder
Quote:
|
Re: Off season skills: Learn how to Solder
Quote:
I'm a big fan of building sensor things and putting them together on a board and making sure the connections are soldered. But I'm also in the camp that says "things that carry power or can be flexed have crimps for connections." So all the boat and robot things I play with have crimps. So I would build my cool ARM / PIC controlled 9 way motion and realtime star sensor on a board and do my usual solder stuff. Off board would most likely be a screw compression connector or some type of RJ-xx connector that locks in place. Both crimping and solder have their places. My Roboteers learned today how to solder and got a cool microprocessor with an 8*8 led matrix display they can control with a $4 remote. What I missed was the ability to spend another hour and go "this is how this works". The "jellybean" level of micro processors is pretty amazing. The board we built has a switch, battery holder, IR sensor, 8 bit processor and a R*C digital LED matrix. In 1974, that would have taken an whole board of 7400 logic chips and hand wire 64 LEDs In 1994 it would be down to a big chip and glue electronics, in 2013, it all fits in a 1" square. |
Re: Off season skills: Learn how to Solder
Lead free solder is awful. I don't use it. It's much easier to end up with a cold solder joint. Have you every had a ps3/xbox fail on you? It's probably because a lead free solder joint got too hot during operation, and got ruined.
|
Re: Off season skills: Learn how to Solder
Quote:
This gives us a teachable moment: Lead is toxic. I instruct all students handling solder (in any manner) that they must wash their hands twice with soap, hot water, and vigorous scrubbing. And I enforce it very strictly. I teach them to think of their hands as dirty or sticky as soon as they handle solder, and to maintain that thought until their hands get washed. Some say it helps remind them. |
Re: Off season skills: Learn how to Solder
I'm not sure what size is meant by "medium" or "large" joints. But from experience I'd recommend soldering Anderson Powerpole connectors instead of / after crimping them; doing a poor crimp job is easy and leads to failures. Adding a bit of solder instead of / after each crimp gives a little bit more protection.
Quote:
|
Re: Off season skills: Learn how to Solder
Quote:
Lead foil was a popular material for tinsel manufacture for several decades of the 20th century. Unlike silver, lead tinsel did not tarnish, so it retained its shine. However, use of lead tinsel was phased out after the 1960s due to concern that it exposed children to a risk of lead poisoning. In the United States, the Food and Drug Administration (FDA) concluded in August 1971 that lead tinsel caused an unnecessary risk to children, and convinced manufacturers and importers to voluntarily stop producing or importing lead tinsel after January 1, 1972. The FDA did not actually ban the product because the agency did not have the evidence needed to declare lead tinsel a "health hazard."http://en.wikipedia.org/wiki/Tinsel When my brother and I were kids back in the late '50s, we used to roll the lead tinsel into a ball as we were taking it off the tree and then tightly compact it with our molar teeth to make lead "marbles". Probably explains a lot :-( |
Re: Off season skills: Learn how to Solder
I think he's referring to the wires in some light strings--or rather, the coatings of the wires. I want to say I've seen some of those warnings, but can't remember anything specific.
|
Re: Off season skills: Learn how to Solder
Quote:
http://usatoday30.usatoday.com/yourl...NLINE_va_N.htm Safety labels are important to read, even if you think there isn't much to know about the product. |
Re: Off season skills: Learn how to Solder
Quote:
|
| All times are GMT -5. The time now is 19:30. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi