Inventor 14 VBA Failed to Initialize
 

I just downloaded the Inventor Pro 14 student software off their educational site, and when I start up Inventor I'm greeted with the following message:
(Specifically I need to close the error 6 times, so I imagine that means it's occurring 6 times.)
Except restarting helps nothing, and neither did installing. Help?

Re: Inventor 14 VBA Failed to Initialize
 

This might help:

http://forums.autodesk.com/t5/Autode...r/td-p/3543758

Re: Inventor 14 VBA Failed to Initialize
 

When you say you go to run Inventor, do you mean you go to run the installer, or is it already installed and you go to run the actual program?

I can't remember what the error said, but when I downloaded it I moved the installer .exe file to my desktop from my downloads folder. It wouldn't let me install it because I moved it. I had to redownload it and try it again (moving the installer back to the downloads folder does not work).

Re: Inventor 14 VBA Failed to Initialize
 

I mean go to run inventor itself. I already installed the program.

*Edit* At the moment I simply downloaded Inventor 13 for use.

Re: Inventor 14 VBA Failed to Initialize
 

Do you have Microsoft Office installed and if so which version?
Have you tried to open the VBA editor in Microsoft Excel or Word?

Re: Inventor 14 VBA Failed to Initialize
 

I had some troubles installing Inventor 2014 but I think it was on my end, not theirs. As for running after the install it seems to work fine.

Re: Inventor 14 VBA Failed to Initialize
 

I had major problems installing Inventor 2014 (and 2013). It was caused by an improper .NET Framework 4.0. Factory resetting my computer worked like a charm :)

Re: Inventor 14 VBA Failed to Initialize
 

I have not tried opening the VBA editor in Excel or Word

I haven't had any issues running the installer. My issue is trying to run Inventor 14 itself.

My setup information:
OS: Windows 8
Processor: Intel Core i7-4770K @ 3.5GHz
System: 64-bit
Graphics: 2 MSI 7950s running CrossFire X
Memory: 16gb (8x2) Ripjaw X series
Autodesk Inventor Pro 2014 installed fine(?) both times, as well as repaired fine(?). I put ? after both fines because there were no prompted errors in these operations.

Re: Inventor 14 VBA Failed to Initialize
 

Bet you will get the same error if you try to open that.

Re: Inventor 14 VBA Failed to Initialize
 

And, er, how would I go about trying out this test?

Re: Inventor 14 VBA Failed to Initialize
 

I've had the same issue in the past. It was a new version of Microsoft Office that was the culprit. It seems to want to argue with Inventor. Something about how Office runs VBA in it's own little environment or something like that. Look for VBA7.msi in your Inventor installation media (You may have to download it from Autodesk, but not follow through with installation again, because I think the default behavior after installing Inventor is to delete the installation files). Install that and Inventor should run fine (for now). I've heard opening an Office application will undo your progress and you'll have to reinstall the VBA7.msi every time, but I can't confirm that. Apparently it's a known issue and Autodesk and Microsoft are working together on a solution. In the mean time, the customer loses. :(

Good luck

Re: Inventor 14 VBA Failed to Initialize
 

Yeap that's the exact issue I linked earlier.
Just be glad you didn't get French for a spell checker (not kidding that was an actual Office bug).

To start VBA in Microsoft Word or Excel:
Open either program.
Press these keys at the same time: ALT F11

Bet you get an error instead of the VBA editor.

Re: Inventor 14 VBA Failed to Initialize
 

Well for Microsoft Office University 2013 Word I got what appeared to be a VBA editor rather than an error.

Re: Inventor 14 VBA Failed to Initialize
 

Guess I lost that bet ;)
Interesting that it works at all.
Probably have the older version.

As pointed out above try to search for your VBA7.msi file.
Run that.

Re: Inventor 14 VBA Failed to Initialize
 

I ran into the same exact problem. I've been using Solidworks and Creo while I wait on a solution from Autodesk/Microsoft.

Re: Inventor 14 VBA Failed to Initialize
 

What version of Office are you running?

Re: Inventor 14 VBA Failed to Initialize
 

This issue extends (just a little bit) to SolidWorks as well (and rather annoyingly). In order for SolidWorks to open Inventor files, it requires Inventor to be installed (or possibly just the reader), but in any case, if you have the issue with Inventor, you cannot open up ipt files in SolidWorks either. This is rather annoying if FIRST releases game elements in Inventor files (like they have in the past). Fortunately, many files also have STEP versions available.

Re: Inventor 14 VBA Failed to Initialize
 

2013

Generally I just wait for the STEP files to come out. I know the conversions are not perfect but I have no problem going in and fixing the important parts if need be. I haven't been using any FIRST published files lately, mostly been designing dream robots for Ultimate Ascent :) http://www.3dcontentcentral.com/ also has a ton of solidworks files for FIRST

Re: Inventor 14 VBA Failed to Initialize
 

I was able to install Inventor 2014 in a VMWare Workstation 9 virtual machine with Windows 7 Home Premium 32bit and .NET Framework 4.5 full administrative download.

It starts fine like this.
Will try installing Office 2013 over it later.

It put Vba7.msi in:
C:\Autodesk\Autodesk_Inventor_2014_Eng_32bit_dlm\3 rdParty\x86\VBA

By any chance are any of the affected people using the 64bit version of Microsoft Office?

Re: Inventor 14 VBA Failed to Initialize
 

Maybe what you need is a less powerful computer.:D

Re: Inventor 14 VBA Failed to Initialize
 

:D You know with old games sometimes you need to turn off the 'Turbo' button.

Anyway...
After moving my virtual Windows 7 PC to Apple and resizing it with Fusion then taking it back to my HP laptop....

I installed Office 365 and BOOM!
There's the same error the same number of times.
So I closed Microsoft Office 365's version of Word.
Closed Autodesk Inventor 2014.
Ran Vba7.msi from my link above.
Opened Inventor 2014 and no more BOOM!
Closed Inventor 2014 and restarted Office 365. No problem.
Opened VBA in Office 365's version of Word. No problem.
Restarted Autodesk Inventor 2014. No problem.
Opened Auotdesk Inventor 2014 and Office 365's version of Word at the same time. No problem.

So the fix works for me at least.
Back to the question of whether the affected users are using Office 64bit?

Re: Inventor 14 VBA Failed to Initialize
 

Thank you to everyone on this thread. It's the day before our first regional and I need to tweak the CAD and this problem just happened to me for the first time. You all literally saved me. Thank you for being more helpful than the Autodesk website!!

Re: Inventor 14 VBA Failed to Initialize
 

That is odd. I use Inventor 2014 Pro 64 Bit and Office 2013 Pro 64 Bit on Windows 7 Home Premium 64 Bit and I have had no problems (knock on wood).

Re: Inventor 14 VBA Failed to Initialize
 

Here is the link from the Autodesk website to resolve this issue.

http://knowledge.autodesk.com/suppor...-properly.html

Re: Inventor 14 VBA Failed to Initialize
 

Noo Phild got to it before me. I had the same issue when running Inventor 14 on Windows 8. The link is posted below hope it helps!

http://forums.autodesk.com/t5/Invent...946394#M472744