Inventor 14 VBA Failed to Initialize
 

I just downloaded the Inventor Pro 14 student software off their educational site, and when I start up Inventor I'm greeted with the following message:
(Specifically I need to close the error 6 times, so I imagine that means it's occurring 6 times.)
Except restarting helps nothing, and neither did installing. Help?

Re: Inventor 14 VBA Failed to Initialize
 

This might help:

http://forums.autodesk.com/t5/Autode...r/td-p/3543758

Re: Inventor 14 VBA Failed to Initialize
 

When you say you go to run Inventor, do you mean you go to run the installer, or is it already installed and you go to run the actual program?

I can't remember what the error said, but when I downloaded it I moved the installer .exe file to my desktop from my downloads folder. It wouldn't let me install it because I moved it. I had to redownload it and try it again (moving the installer back to the downloads folder does not work).

Re: Inventor 14 VBA Failed to Initialize
 

I mean go to run inventor itself. I already installed the program.

*Edit* At the moment I simply downloaded Inventor 13 for use.

Re: Inventor 14 VBA Failed to Initialize
 

Do you have Microsoft Office installed and if so which version?
Have you tried to open the VBA editor in Microsoft Excel or Word?

Re: Inventor 14 VBA Failed to Initialize
 

I had some troubles installing Inventor 2014 but I think it was on my end, not theirs. As for running after the install it seems to work fine.

Re: Inventor 14 VBA Failed to Initialize
 

I had major problems installing Inventor 2014 (and 2013). It was caused by an improper .NET Framework 4.0. Factory resetting my computer worked like a charm :)

Re: Inventor 14 VBA Failed to Initialize
 

I have not tried opening the VBA editor in Excel or Word

I haven't had any issues running the installer. My issue is trying to run Inventor 14 itself.

My setup information:
OS: Windows 8
Processor: Intel Core i7-4770K @ 3.5GHz
System: 64-bit
Graphics: 2 MSI 7950s running CrossFire X
Memory: 16gb (8x2) Ripjaw X series
Autodesk Inventor Pro 2014 installed fine(?) both times, as well as repaired fine(?). I put ? after both fines because there were no prompted errors in these operations.

Re: Inventor 14 VBA Failed to Initialize
 

Bet you will get the same error if you try to open that.

Re: Inventor 14 VBA Failed to Initialize
 

And, er, how would I go about trying out this test?

Re: Inventor 14 VBA Failed to Initialize
 

I've had the same issue in the past. It was a new version of Microsoft Office that was the culprit. It seems to want to argue with Inventor. Something about how Office runs VBA in it's own little environment or something like that. Look for VBA7.msi in your Inventor installation media (You may have to download it from Autodesk, but not follow through with installation again, because I think the default behavior after installing Inventor is to delete the installation files). Install that and Inventor should run fine (for now). I've heard opening an Office application will undo your progress and you'll have to reinstall the VBA7.msi every time, but I can't confirm that. Apparently it's a known issue and Autodesk and Microsoft are working together on a solution. In the mean time, the customer loses. :(

Good luck

Re: Inventor 14 VBA Failed to Initialize
 

Yeap that's the exact issue I linked earlier.
Just be glad you didn't get French for a spell checker (not kidding that was an actual Office bug).

To start VBA in Microsoft Word or Excel:
Open either program.
Press these keys at the same time: ALT F11

Bet you get an error instead of the VBA editor.

Re: Inventor 14 VBA Failed to Initialize
 

Well for Microsoft Office University 2013 Word I got what appeared to be a VBA editor rather than an error.

Re: Inventor 14 VBA Failed to Initialize
 

Guess I lost that bet ;)
Interesting that it works at all.
Probably have the older version.

As pointed out above try to search for your VBA7.msi file.
Run that.

Re: Inventor 14 VBA Failed to Initialize
 

I ran into the same exact problem. I've been using Solidworks and Creo while I wait on a solution from Autodesk/Microsoft.