An effort to get all the blue prints measurment
 

Posted by Ken Leung at 1/11/2001 4:05 AM EST


Student on team #192, Gunn Robotics Team, from Henry M. Gunn Senior High School.



Some of us in GRT attempted to Convert the pdf drawing of the blue print into AutoCAD format, and have a lot of trouble because of missing measurments, as well as conflicting numbers. This is also the cause of tons of confusion in construction of the field. So, are there any team who've already got an AutoCAD format of the blue print? That would make life much easier. However, I am still not sure any AutoCAD out there will be totally accurate, as the blueprint, even the updated ones are really not perfect.

So, let's gather effort of people and have a collection of errors on blue print, mean while our team will still work on our AutoCAD format, and hopefully we will be able to create the best blueprint possible, and we will include the errors people found, and together, we can submit that final blueprint to FIRST, and have them check it out, and finally return a perfect blueprint which everyone can use.

Anyone interested? I mean, we can do all these by ourself, but it's a rather tedious process, and help will make it faster and easier, and you are going to be happy when the final blueprint come back as soon as possible.

Re: An effort to get all the blue prints measurment
 

Posted by Ed at 1/11/2001 8:10 PM EST


Coach on team #34, DaimlerChrysler/ Bob Jones High , from Bob Jones High / New Century High and DaimlerChrysler/Bob Jones High/ New Century High.


In Reply to: An effort to get all the blue prints measurment
Posted by Ken Leung on 1/11/2001 4:05 AM EST:



I've posted an Autocad 2000 3D model of the field on the link below. There are a couple of "educated guesses" and the info from the updates has been applied. Take a look.