Chief Delphi - LVMastery is shutting down

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - LVMastery is shutting down (http://www.chiefdelphi.com/forums/showthread.php?t=119915)

Ether

01-10-2013 11:34

LVMastery is shutting down

FWIW. Just received the following email:

Quote:

Hello.

You are receiving this email because you are a valued LVMastery customer or have signed up for a free trial on LVMastery.com.

For nearly 6 years, LVMastery has been providing you with video-based LabVIEW training.
We wanted to inform you that we not updating the material further, and will be shutting down the website shortly.

Enable Integration, the company behind LVMastery, is a Silver Alliance Partner of NI.

We work with customers large and small to assist them integrating NI Hardware and LabVIEW.
Check out our reviews and profile at NI.com.

As a valued customer an supporter over the years, we wanted to offer you a FREE code review.

For more information, or to take us up on this offer, please follow this link and fill in the form.

Thanks again,

Ben Zimmer, President

Aaron.Graeve

01-10-2013 12:23

Re: LVMastery is shutting down

That is a terrible shame. I learned LabVIEW there and I consider it one of the best ways of learning LabVIEW for FRC. The videos were a bit older, but still very informative.

billbo911

01-10-2013 13:51

Re: LVMastery is shutting down

Quote:

Originally Posted by Aaron.Graeve (Post 1294041)

That is a terrible shame. .... I consider it one of the best ways of learning LabVIEW for FRC. The videos were a bit older, but still very informative.

+1

Honestly, I could not do a better job of introducing students to LabVIEW than what was available on LVMastery. I regularly pointed new students to that site to start the learning process. There is going to be a huge hole in the Universe with LVMastery shutting down.

Phalanx

01-10-2013 16:09

Re: LVMastery is shutting down

That's a real shame. LVMastery was a great site for learning Labview in a hands on, follow along kind of way. It helped me immensely 6 years ago.

I do hope, that those videos, while old and a little dated will be still be available somewhere on the net. I'd still like to be able to refer back to them for reference.

Invictus3593

02-10-2013 01:28

Re: LVMastery is shutting down

Quote:

Originally Posted by Phalanx (Post 1294066)

I do hope, that those videos, while old and a little dated will be still be available somewhere on the net. I'd still like to be able to refer back to them for reference.

I really hope someone saved them for curriculum purposes and puts them on Youtube. Those videos helped me so much in my first year!

Blackphantom91

03-10-2013 09:30

Re: LVMastery is shutting down

This is the website that I learned labview from also. I think it is unfortunate that it is going away. Really hands on learning is the way to go for teaching students. Great run though.

wilsonmw04

03-10-2013 13:10

Re: LVMastery is shutting down

would they be willing to allow me to archive their material? Sending emails now.

Apparently I can't send an email directly to them. Does someone have their contact info?

Tom Line

03-10-2013 15:58

Re: LVMastery is shutting down

We collaborated with them on that effort. I just emailed Ben to see what's up. Once upon a time I had copies of all the videos, but I can't host them without formal approval since we don't own them. I'm not even sure I still have them archived.

Tom Line

04-10-2013 16:04

Re: LVMastery is shutting down

I just got a follow up email from them. They will still have the lessons available on their blog and youtube.

In terms of the content, the best 42 snippet videos have been shifted to our blog and YouTube channel so you'll still be able to access them. Please see the links below.

http://enableintegration.com/blog/

http://www.youtube.com/user/EnableEngVideo

The unedited/original content will be productized and sold via app or DVD at some point in the near future and I will let you know when that happens.

I don't see any of the FRC specific video yet, so I have another email in. It would be spectacular if FIRST could purchase the rights to those videos and distribute them with the kit of parts.

Ether

04-10-2013 16:09

Re: LVMastery is shutting down

Thanks for looking into this Tom.

Tom Line

04-10-2013 22:09

Re: LVMastery is shutting down

Ok, I just talked with them again. FRC Mastery will remain in place. Only the LVMastery items are being moved to youtube and the blog.

Thanks to Enable Training and Ben Zimmer for continuing to support FIRST. FRCMastery is a tool I regularly direct new teams toward to learn LabVIEW.

xisybyl

10-10-2013 15:34

Re: LVMastery is shutting down

Thanks to all. FRCmastery has been my first choice for training, although there are many other good choices now.

Does anyone know why http://www.frcmastery.com/ shows up as a "Reported attack page" and has anyone else had this trouble?

Ether

10-10-2013 15:50

Re: LVMastery is shutting down

1 Attachment(s)

Quote:

Originally Posted by xisybyl (Post 1295758)

has anyone else had this trouble?

Yes.

Quote:

Does anyone know why http://www.frcmastery.com/ shows up as a "Reported attack page"

see attachment

All times are GMT -5. The time now is 09:54.