Chief Delphi - [HELP] cRIO not imaging as it should be

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - [HELP] cRIO not imaging as it should be (http://www.chiefdelphi.com/forums/showthread.php?t=120262)

Re: [HELP] cRIO not imaging as it should be

Quote:

Originally Posted by BBray_T1296 (Post 1295821)

Pinging an IP (or website)

from the desktop with all windows minimized and an Ethernet link directly from your computer to the cRIO (powered on)
-hold /windows key (meta)/ and while holding, press /r/
-type "cmd" (no quotes)
-press /enter/
-type "ping" then /spacebar/ then "your cRIO's IP" (you said before: 10.46.45.5)
-press /enter/

It should look something like picture 1 ("google.com" will be "10.46.45.5"). Of course, the ping values may be different, but that is not what you are pinging to test, you just want any reply at all. If it looks like picture 2, I would try pinging "10.46.45.1" If that fails, you may have a problem. If it works and you DO get a reply, however, there may be hope yet...

Anyways, If it is bricked, NI probably has some sort of warranty on that...

We tried pinging and 10.46.45.9 was the only one that was successful. Our computer is set to 10.46.45.9; did it just ping the computer?

Re: [HELP] cRIO not imaging as it should be

Quote:

Originally Posted by domingocool (Post 1298238)

We tried pinging and 10.46.45.9 was the only one that was successful. Our computer is set to 10.46.45.9; did it just ping the computer?

Yes, I'd say you just pinged yourself. However, that's the address defined for the wireless network adapter. Are you trying this using a wireless connection, or a wired one? It's never a good idea to try to reimage a cRIO over Wi-Fi; too much can go wrong.