![]() |
[HELP] cRIO not imaging as it should be
So, we've been having trouble imaging our cRIO for two days and can't seem to figure out why. We periodically get the two blinks on the status lights so we installed NI MAX 5.5 and re-formatted the cRIO and re installed the software with all the add-ons. We set out LAN IP to 10.46.45.5 and the subnet mask to 255.255.255.0. When we try to image it it still doesn't image(or at least starts but puts an error(Error 7)). Also the modules never show up on the Imaging Tool nor are the little switches usable. We've tried everything we feel that we can so any help would be awesome. Thanks.
|
Re: [HELP] cRIO not imaging as it should be
Have you pulled the modules and checked the condition of the pins in the chassis? The HD15 connectors are susceptible to bent pins if the modules are not installed correctly.
|
Re: [HELP] cRIO not imaging as it should be
Quote:
Also, you are connecting your ethernet cable directly to the crio from the computer, right? |
Re: [HELP] cRIO not imaging as it should be
Is it a 4 slot cRio?
|
Re: [HELP] cRIO not imaging as it should be
Quote:
You say you installed "all the add-ons"? Does that include the FRC Utilities update? Error 7 usually means that a program can't find a necessary file. Perhaps you tried to run the update from inside the compressed folder without extracting the files first. |
Quote:
|
Quote:
|
Quote:
|
Re: [HELP] cRIO not imaging as it should be
Quote:
|
Re: [HELP] cRIO not imaging as it should be
2 Attachment(s)
Quote:
from the desktop with all windows minimized and an Ethernet link directly from your computer to the cRIO (powered on) -hold /windows key (meta)/ and while holding, press /r/ -type "cmd" (no quotes) -press /enter/ -type "ping" then /spacebar/ then "your cRIO's IP" (you said before: 10.46.45.5) -press /enter/ It should look something like picture 1 ("google.com" will be "10.46.45.5"). Of course, the ping values may be different, but that is not what you are pinging to test, you just want any reply at all. If it looks like picture 2, I would try pinging "10.46.45.1" If that fails, you may have a problem. If it works and you DO get a reply, however, there may be hope yet... Anyways, If it is bricked, NI probably has some sort of warranty on that... |
Re: [HELP] cRIO not imaging as it should be
If they used the FRC cRIO Imaging tool, shouldn't the cRIO IP be 10.46.45.2? I think 10.46.45.5 is the IP of their driver station.
|
Re: [HELP] cRIO not imaging as it should be
Oh well I don't know. Just try pinging everything from ".1" to ".10" at least one is bound to work (or not)
|
Re: [HELP] cRIO not imaging as it should be
Quote:
What instructions did you use? What software did you reinstall on the cRIO? How did you install the FRC Utilities on your computer, and did you apply the FRC Utilities Update? |
Re: [HELP] cRIO not imaging as it should be
Quote:
|
Re: [HELP] cRIO not imaging as it should be
Quote:
|
| All times are GMT -5. The time now is 03:31. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi