Chief Delphi - Jag Help

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Jag Help (http://www.chiefdelphi.com/forums/showthread.php?t=120357)

jimbo493

13-10-2013 17:25

Jag Help

So guys

We are using a combination of both black and grey jags, have them daisy chained together, but we arent able to see all of them on the computer.

We have Jag 6, going to 8 then to 7 then to 4, and on the computer it only shows 6, 8, and 4, even though 4 is connected to 7, and we can see 4.

Any ideas?

~jimbo

dellagd

13-10-2013 17:43

Re: Jag Help

Which version of Jag is the number 7?

Also, are you using a terminator block at the end of the chain?

gracie.

13-10-2013 20:10

Re: Jag Help

Your problem is probably having a grey jag at the wrong point in the chain.
Specifying colors would be nice....

s1900ahon

13-10-2013 20:23

Re: Jag Help

Quote:

Originally Posted by jimbo493 (Post 1296191)

Any ideas?

Check to see that the CAN cables are correct. If some are crossed over it could explain what you're seeing.

At CMP a couple of years back, one team made incorrect cables that crossed, and so they could only see the first, third, fifth, etc. Jags in the chain. Two crossed wires cancel the cross. Easy to do.

So, if you change the wiring order, does the problem follow the wire or Jaguars?

Scott

All times are GMT -5. The time now is 10:10.