Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)
-   -   Driver Station size restriction? (http://www.chiefdelphi.com/forums/showthread.php?t=120858)

Invictus3593 25-10-2013 09:39

Driver Station size restriction?
 
Is it illegal to make a driver station that is more than 12in deep? The only thing I've seen in the manual is this blurb right here:

Quote:

Attached to the ALLIANCE WALL in each PLAYER STATION is an aluminum shelf to support the OPERATOR CONSOLE for the FRC Team in that PLAYER STATION. The support shelf measures 69 in. wide by 12 in. deep. There is a 54 in. long by 2 in. wide strip of hook-and-loop tape (“loop” side) along the center of the support shelf that may be used to secure the OPERATOR CONSOLE to the shelf.

But even then, this doesn't say anything about the size of the actual driver station, just the player station shelf.

Joe Ross 25-10-2013 09:45

Re: Driver Station size restriction?
 
See R93

MechEng83 25-10-2013 10:00

Re: Driver Station size restriction?
 
From the manual
Quote:

R93
The OPERATOR CONSOLE must not exceed 60 in. long by 12 in. deep (excluding any items that are held or worn by the DRIVERS during the match).

Quote:

There is a 54 in. long by 2 in. wide strip of hook-and-loop tape (“loop” side) along the center of the PLAYER STATION support shelf that may be used to secure the OPERATOR CONSOLE to the shelf. See Section 2.2.9 for details.


Incidentally, there is no maximum height requirement listed...

Invictus3593 25-10-2013 13:12

Re: Driver Station size restriction?
 
Thanks guys!


All times are GMT -5. The time now is 20:05.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi