one more thing i have to ask
 

Posted by Stephen Riley at 1/19/2001 6:33 PM EST


Engineer on team #419, RAMBOTS, from Wentworth Institute of Technology and Umass/BCHigh and Mathsoft, Solidworks, and NASA.



also can anyone tell me the height of the horizontal bar above the base of the goal? i think i did my math wrong, but as i said i'm not the brightest :) pretty scary considering i'm an enginner :)
-Steve
BallBoy

Re: one more thing i have to ask
 

Posted by Ed Sparks at 1/19/2001 7:13 PM EST


Coach on team #34, The Rockets, from Bob Jones High / New Century High and DaimlerChrysler.


In Reply to: one more thing i have to ask
Posted by Stephen Riley on 1/19/2001 6:33 PM EST:



The Kee Klamp catalog indicates that the distance from the bottom of the KK70-7 (top surface of the plywood) and the centerline of the pipe that makes up the handle should be 2.5"

Re: one more thing i have to ask
 

Posted by Stephen Riley at 1/19/2001 7:34 PM EST


Engineer on team #419, RAMBOTS, from Wentworth Institute of Technology and Umass/BCHigh and Mathsoft, Solidworks, and NASA.


In Reply to: Re: one more thing i have to ask
Posted by Ed Sparks on 1/19/2001 7:13 PM EST:



: The Kee Klamp catalog indicates that the distance from the bottom of the KK70-7 (top surface of the plywood) and the centerline of the pipe that makes up the handle should be 2.5"

thank you, very helpful

ninnies with power tools my friend....
 

Posted by Anton Abaya at 1/19/2001 11:36 PM EST


Coach on team #419, Rambots, from UMass Boston / BC High and NONE AT THE MOMENT! :(.


In Reply to: one more thing i have to ask
Posted by Stephen Riley on 1/19/2001 6:33 PM EST:



i'm a darn CS student....i drill with a keyboard for heaven's sake! :)

-anton