Re: pic: Short Swerve Module
 

Very impressive CAD. Can you post a picture of the other side? I love how over the past 10 years that I have been in FIRST is how much smaller drivetrains are today. I remember when I thought 6 inches wheels were tiny on a robot.

Re: pic: Short Swerve Module
 

Andrew - Solid work. I haven't fully digested all of it, how about a few more angles?


Not just Aren...

Re: pic: Short Swerve Module
 

^ what he said, they probably would've done a lot better without me making them do dumb things like that swerve.

Re: pic: Short Swerve Module
 

Along with this question, can you post a render of just the wheel housing+sprocket?

Re: pic: Short Swerve Module
 

I'm going to go out on a limb for everyone here and ask for a STEP file. I think a few screen shots would do justice but the actual file would not only help all of us understand what's going on but also help you with specific design revisions after comments are posted.

Re: pic: Short Swerve Module
 

This. Other than that, this rendering looks absolutely beautiful.

Re: pic: Short Swerve Module
 

Wow I got a lot of questions!

First off thanks for the compliments and questions!

Sorry for the late responses I have been busy for the past 24 ish hours.

Anyways Below I have answered a large majority of the questions I believe, If I missed yours feel free to remind me! Also I have made a Google+ Album of what I had screen capped from my CAD, including some requests.

https://plus.google.com/u/0/photos/1...49989384789217

The Red/Orange Swerve Pod has a fun manufacturing procedure, I figured it could be machined with a very complex/expensive machine/run-time given the capabilities, but it also can be printed as well using DMS printers (easiest way in my opinion). The bearings that hold the modules in place are in two locations If you can see the white plastic, those actually house the pod inside it keeping it nice and stable. They would be made of Delrin most likely and would have to be assembled to be very concentric. Again this would be a highly experimental mechanism and its been something I want to prototype for a while. I also think it gives it a cool look, but that's just me.

I designed it this way as just a personal challenge, my last one was 6 inches tall and I really aimed to make this one reach 4 inches. 4 inches was absolute best case Everything worked, 5 inches was acceptable. I hit 4.6 and admittedly I could remove some more material if I wanted but I didn't to keep some integrity of the plastic.

I think if I were to make one of these I would prototype it in plastic just for a desk piece, but all parts should be Aluminum, or for fun 3D printed Titanium. (not a cheap project to undertake) That being said I do hope to make an operational one eventually.

This was also a concern of mine as well, I could probably choose a micro-guided cylinder now that I think about it and get a better result for the shifting I might have to revisit this portion for another iteration.

I don't remember, I think I actually used the Gear Creator in Inventor simply because I had accepted that the amount of custom parts for this project was through the roof already. And that it was really just a proof of concept.

Of course I do!

This was modeled in Autodesk Inventor 2013 On my home computer, and rendered by my friend Cody Smith. I haven't had time to make any renders and he likes seeing what his rig can actually do as he upgrades it. This was actually just a draft render, but we both have become so busy recently that we couldn't work further into making a final one. That and this module alone could cripple most rigs in terms of poly-counts

Album Link here, and in photo description shows more detail on how this system works.

https://plus.google.com/u/0/photos/1...49989384789217

Very, Very Small. .4375 inches from the bottom of the belly pan, to the bottom of the wheel. Mounting mounting can be seen in the various pictures in the Album, its an array of 8-32 bolts that would be bolt the entire thing to the frame, I also considered a motor support to counter act the load of the motors hanging off that far. As one could see the Actual CAD seems unfinished missing various electronic components. This is because I figured I would design those into whatever structure attached the drive train to the rest of the robot.

I can probably get the CAD up eventually, I'd have to do some cleaning up/final gritty details to complete.

I think that's everything! Feel free to expand on what new information you have!

Re: pic: Short Swerve Module
 

This is so cool! A great design project and really out of the box.

Great work!

Re: pic: Short Swerve Module
 

In this picture, why did you opt to put the CIMs inward? I would think it would probably be more optimized with them along the outer walls, but I guess it would depend on attachments for piece manipulation. Maybe a staggered layout to put the CIMs side by side to gain room along a different dimension. (in this image, opt for a "wide bot" manipulator and turn the "front" two modules so the cims run along the "side" walls, freeing center space)



Sorry for the page reformatting lol

Re: pic: Short Swerve Module
 

I did this so the wheels were at the outermost point of the robot, and Ironically the entire drive base is 17.9 x 22.25 x 4.6 in that picture. Keep in mind this entire system is also 4 inches tall, If I were to put anything on top of this I would do an over the bumper manipulation technique.