circuit breaker
 

Posted by Josh at 1/20/2001 9:55 AM EST


Engineer on team #419, Rambots, from Wentworth Institute of Technology.



Is there any empty space in the circuit breaker? like how much of the inside of the circuit breaker is actually used for the internal components. could we drill holes (for weight perpouses and such...really) in it if we were careful not to hit or alter anything inside it?or is it completely impossible to modify it like that?

Josh
"you keep using that word, i do not think it means what you think it means."

Impossible? Who knows...Allowed? Nope...
 

Posted by Nate Smith at 1/20/2001 12:06 PM EST


Other on team #66, GM Powertrain/Willow Run HS, from Eastern Michigan University and GM Powertrain.


In Reply to: circuit breaker
Posted by Josh on 1/20/2001 9:55 AM EST:



Not a bad idea, but unfortunately, it's not allowed...rule C1:
The Operator Interface, Robot Controller, Servos, Speed Controllers, Relay Modules, Radio Modems, Batteries, Battery Charger, Power Supply, 9 pin cables, CIRCUIT BREAKERS, fuses, and joysticks may not be tampered with, modified, or adjusted in any way...

I know there have been a couple updates that slightly modified this rule, but none of the changes had anything to do with the breaker...sorry..

Nate

Re: Impossible? Who knows...Allowed? Nope...
 

Posted by Josh at 1/20/2001 12:26 PM EST


Engineer on team #419, Rambots, from Wentworth Institute of Technology.


In Reply to: Impossible? Who knows...Allowed? Nope...
Posted by Nate Smith on 1/20/2001 12:06 PM EST:



: Not a bad idea, but unfortunately, it's not allowed...rule C1:
: The Operator Interface, Robot Controller, Servos, Speed Controllers, Relay Modules, Radio Modems, Batteries, Battery Charger, Power Supply, 9 pin cables, CIRCUIT BREAKERS, fuses, and joysticks may not be tampered with, modified, or adjusted in any way...

: I know there have been a couple updates that slightly modified this rule, but none of the changes had anything to do with the breaker...sorry..

: Nate

thanks a bunch.

Josh
"DOWN WITH THE MAN!" -(can't post name due to politics).