Velocity on Robot
 

Posted by Brian at 1/20/2001 6:54 PM EST


Student on team #670, HHSRC, from Homestead High School.



Does anybody know if it's possible to measure the velocity of the robot or the rpm's of the motors with any of the parts given by FIRST. Or is there any other way to do this.

Thank you.

Re: Velocity on Robot
 

Posted by Rich Reynolds at 1/20/2001 10:27 PM EST


Student on team #237, Sie-H20-Bots, from Watertown High School and Eastern Awning, Siemon Co..


In Reply to: Velocity on Robot
Posted by Brian on 1/20/2001 6:54 PM EST:



FIRST gives spec sheets on all the motors. check you "big book" otherwise, do you have a specific motor your looking for. another way that you could try, but talk to your electrical guys first, make a cam and put it on the output shaft. then hook up, say a limit switch as a counter... that will tell you the rpm's in a round about way... rich


: Does anybody know if it's possible to measure the velocity of the robot or the rpm's of the motors with any of the parts given by FIRST. Or is there any other way to do this.

: Thank you.