Chief Delphi
Page 15 of 18 « First < 5891011121314 15 161718 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Back for more..VEXpro 2014 Product Unveiling (http://www.chiefdelphi.com/forums/showthread.php?t=122129)

Scoyle 02-01-2014 23:32
Re: Back for more..VEXpro 2014 Product Unveiling
 
Quote:
Originally Posted by Aren_Hill (Post 1319683)
The VersaChassis HEX shaft is a ready made axle for the VersaChassis system.
If you have lathe capabilities it will be more cost effective to buy the Hex stock. But basic axle functionality is present with just the VersaChassis Hex shaft (snap ring groove, encoder hole, tapped shaft end).

Hope this helps,

-Aren
Thanks, that helps a lot.

mrnoble 03-01-2014 00:32
Re: Back for more..VEXpro 2014 Product Unveiling
 
Quote:
Originally Posted by Ricky Q. (Post 1319643)
We're working through a shipping issue on the frame components right now. They are shipping from our supplier tomorrow and January 10th is a worst-case shipping date from our warehouse.

The motion components have had a January 15th ship date since the product announcement. We're doing all we can to ship them sooner and will get them our ASAP.

We want this stuff in your guys' hands as badly as you do. Thanks for your patience and we apologize for any inconvenience.

Best,
Ricky
Thank you, Ricky. We know you guys are working hard to get the stuff out to us.

One question: we received a partial shipment, minus the frame components. Will I get a second shipping notification when the frame is shipped?

Thanks again!

Ricky Q. 03-01-2014 10:58
Re: Back for more..VEXpro 2014 Product Unveiling
 
Quote:
Originally Posted by mrnoble (Post 1319700)
Thank you, Ricky. We know you guys are working hard to get the stuff out to us.

One question: we received a partial shipment, minus the frame components. Will I get a second shipping notification when the frame is shipped?

Thanks again!
Yes, you will receive another notification once the rest of the order ships.

Best,
Ricky

ksafin 04-01-2014 01:49
Re: Back for more..VEXpro 2014 Product Unveiling
 
Our entire order said it shipped, but then if I check tracking it says its 1.00 lbs.

This order is definitely more like 50 lbs. Why does UPS show 1.00? xD

42! 08-01-2014 01:40
Re: Back for more..VEXpro 2014 Product Unveiling
 
Any idea on the current lead time for the 3 cim ball shifter? It says one week right now. Also will WCP be able to keep up with orders this year? The single speed 3 cim gearbox from them seems like a good WCD option to me, but I'm not sure when I'd be able to get it.

mman1506 08-01-2014 01:55
Re: Back for more..VEXpro 2014 Product Unveiling
 
Have you released any information for adapting the 2 CIM ballshifter to the VersaChassis?

R.C. 08-01-2014 10:22
Re: Back for more..VEXpro 2014 Product Unveiling
 
Quote:
Originally Posted by 42! (Post 1323616)
Any idea on the current lead time for the 3 cim ball shifter? It says one week right now. Also will WCP be able to keep up with orders this year? The single speed 3 cim gearbox from them seems like a good WCD option to me, but I'm not sure when I'd be able to get it.
Yes we will be able to. Should be shipping out all our VEXpro items today/tomorrow and you should be seeing all WCP related items shipping out next week.

Paul Copioli 08-01-2014 10:25
Re: Back for more..VEXpro 2014 Product Unveiling
 
Quote:
Originally Posted by 42! (Post 1323616)
Any idea on the current lead time for the 3 cim ball shifter? It says one week right now. Also will WCP be able to keep up with orders this year? The single speed 3 cim gearbox from them seems like a good WCD option to me, but I'm not sure when I'd be able to get it.
All of the components for the 3 CIM Ball shifter are in our assembly facility here in Greenville. They are currently being inspected and kitted. We are pushing to have these shipping this week.

We got started on the manufacturing of the WCP items a little later than we wanted. Both WCP and VEX are pretty particular about design details so we released the drawings to production later than we wanted. The dates on the VEXpro website for the WCP items are still our expected ship dates. Please note that this is an initial inventory problem only. Once the items arrive, WCP, The Robot Space, and VEX will have plenty of inventory for the entire 2014 season.

Quote:
Originally Posted by mman1506
Have you released any information for adapting the 2 CIM ballshifter to the VersaChassis?
We are working on the application drawings for this and should have them by the weekend.

Answer42 08-01-2014 11:11
Re: Back for more..VEXpro 2014 Product Unveiling
 
Quote:
Originally Posted by Paul Copioli (Post 1323724)
All of the components for the 3 CIM Ball shifter are in our assembly facility here in Greenville. They are currently being inspected and kitted. We are pushing to have these shipping this week.

We got started on the manufacturing of the WCP items a little later than we wanted. Both WCP and VEX are pretty particular about design details so we released the drawings to production later than we wanted. The dates on the VEXpro website for the WCP items are still our expected ship dates. Please note that this is an initial inventory problem only. Once the items arrive, WCP, The Robot Space, and VEX will have plenty of inventory for the entire 2014 season.



We are working on the application drawings for this and should have them by the weekend.
Thanks. That's great to hear.

AustinH 08-01-2014 12:22
Re: Back for more..VEXpro 2014 Product Unveiling
 
Minor question on the .500 hex Versahubs... can they be press-fit into Vexpro wheels and other Versahubs designed to take bearings?

Aren_Hill 08-01-2014 13:17
Re: Back for more..VEXpro 2014 Product Unveiling
 
Quote:
Originally Posted by AustinH (Post 1323800)
Minor question on the .500 hex Versahubs... can they be press-fit into Vexpro wheels and other Versahubs designed to take bearings?
Yup, the hub diameter of the VersaHub is 1.125", same as the bearings.

-Aren

Answer42 08-01-2014 18:07
Re: Back for more..VEXpro 2014 Product Unveiling
 
Are the wcp gearboxes compatible with any encoder mounts?

zcohen 08-01-2014 18:12
Re: Back for more..VEXpro 2014 Product Unveiling
 
You guys released a teaser to the 2014 drive in a day chassis on twitter earlier this week. Do you have an estimate on when it will be listed for sale?

R.C. 08-01-2014 18:14
Re: Back for more..VEXpro 2014 Product Unveiling
 
Quote:
Originally Posted by Answer42 (Post 1324019)
Are the wcp gearboxes compatible with any encoder mounts?
The single speed gearboxes accept a s4 encoder on the back.

The dual speeds do not have any encoder mounts. What we prefer in a WCD config is to put the encoder on the wheel shaft. Every VersaShaft for the WCD comes with a 1/4 hole that allows encoder mounting.

I know manuals aren't released ATM. We are trying to have them done this weekend so teams have more information/how tos available to them.

Let me know if you questions.

Nemo 08-01-2014 18:18
Re: Back for more..VEXpro 2014 Product Unveiling
 
Quote:
Originally Posted by zcohen (Post 1324022)
You guys released a teaser to the 2014 drive in a day chassis on twitter earlier this week. Do you have an estimate on when it will be listed for sale?
+1

Definitely eager to see CAD, pricing, and estimated ship date on DiaD2014 as we make design decisions. We put together a 2013 DiaD in the off season, and we find it to be very nice.


All times are GMT -5. The time now is 08:42.
Page 15 of 18 « First < 5891011121314 15 161718 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi