dimensions of horizontal bar
 

Posted by Travis Covington at 1/23/2001 8:03 PM EST


Student on team #115, MV ROBOTICS, from Monta Vista High School and Hitachi Data Systems - 3com - NASA Ames.



what is the distance from the top of the plywood base of the goal to the center of the horizontal 1 1/4 in. aluminum pipe. Also what is the distance from the center of the same pipe to the edge of the base of the goal.

Re: dimensions of horizontal bar
 

Posted by Mike Sklar at 1/23/2001 8:45 PM EST


Engineer on team #21, ComBBAT , from Astronaut H.S. and Titusville H.S. and Brevard Community College and Boeing Company and NASA-KSC.


In Reply to: dimensions of horizontal bar
Posted by Travis Covington on 1/23/2001 8:03 PM EST:



:The distance from the plywood base to the center of the horiz pipe is defined by the kee clamp fittings. If you have that you can figure it out. If we get a chance we'll measure it and post it here.

The distance from the outside edge of the plywood base to the center of the horiz pipe is another matter? This is a "Yet Another Undefined" (pronounced Ya Hoo) dimension of the now infamous field drawing. We wonder the samething and wish someone from the FIRST staff would post the dimension here or in an update! HINT HINT!

Re: dimensions of horizontal bar
 

Posted by mike o'leary at 1/23/2001 10:32 PM EST


Student on team #419, rambots, from bc high.


In Reply to: dimensions of horizontal bar
Posted by Travis Covington on 1/23/2001 8:03 PM EST:



: what is the distance from the top of the plywood base of the goal to the center of the horizontal 1 1/4 in. aluminum pipe. Also what is the distance from the center of the same pipe to the edge of the base of the goal.


i know our team did the math and im pretty sure that we got a distance of 14.5" from the plywood to the bottom of the pipe
hope that helps
mike

Re: dimensions of horizontal bar
 

Posted by Travis Covington at 1/23/2001 10:41 PM EST


Student on team #115, MV ROBOTICS, from Monta Vista High School and Hitachi Data Systems - 3com - NASA Ames.


In Reply to: Re: dimensions of horizontal bar
Posted by mike o'leary on 1/23/2001 10:32 PM EST:



14.5??

u sure? that seems like alot

any other numbers?

-TC

Re: dimensions of horizontal bar
 

Posted by Stephen Riley at 1/24/2001 8:48 PM EST


Engineer on team #419, RAMBOTS, from Wentworth Institute of Technology and Umass/BCHigh and Mathsoft, Solidworks, and NASA.


In Reply to: dimensions of horizontal bar
Posted by Travis Covington on 1/23/2001 8:03 PM EST:



: what is the distance from the top of the plywood base of the goal to the center of the horizontal 1 1/4 in. aluminum pipe. Also what is the distance from the center of the same pipe to the edge of the base of the goal.

the distance from the top of the plywood to the middle of the aluminum pipe is 2.5" not as my teammate said it :) (i guess hes a bigger ninny than me), i hope that helps you, cause i know that when i was doing the goal math it was a real pain in the $@#$@#$@# where one thing contradicts another, gotta love how they do that on the designs
Steve
AKA BallBoy

Re: dimensions of horizontal bar
 

Posted by Travis Covington at 1/24/2001 9:01 PM EST


Student on team #115, MV ROBOTICS, from Monta Vista High School and Hitachi Data Systems - 3com - NASA Ames.


In Reply to: Re: dimensions of horizontal bar
Posted by Stephen Riley on 1/24/2001 8:48 PM EST:




how about the distance to the bar horizontally from the edge of the plywood?

Re: dimensions of horizontal bar
 

Posted by Stephen Riley at 1/25/2001 10:18 PM EST


Engineer on team #419, RAMBOTS, from Wentworth Institute of Technology and Umass/BCHigh and Mathsoft, Solidworks, and NASA.


In Reply to: Re: dimensions of horizontal bar
Posted by Travis Covington on 1/24/2001 9:01 PM EST:



:
: how about the distance to the bar horizontally from the edge of the plywood?

that is a very good question, and one i still working on, since i can't find any measurments at all for it anywhere, right now i made an edumacated guess at it ( i eyeballed it on the placement on the mockup) it may wok, i hope it does, i wasn't yelled at for it at least :)

Re: dimensions of horizontal bar
 

Posted by mike o'leary at 1/24/2001 9:36 PM EST


Student on team #419, rambots, from bc high.


In Reply to: Re: dimensions of horizontal bar
Posted by Stephen Riley on 1/24/2001 8:48 PM EST:



: : what is the distance from the top of the plywood base of the goal to the center of the horizontal 1 1/4 in. aluminum pipe. Also what is the distance from the center of the same pipe to the edge of the base of the goal.

: the distance from the top of the plywood to the middle of the aluminum pipe is 2.5" not as my teammate said it :) (i guess hes a bigger ninny than me), i hope that helps you, cause i know that when i was doing the goal math it was a real pain in the $@#$@#$@# where one thing contradicts another, gotta love how they do that on the designs
: Steve
: AKA BallBoy

oops my mistake...i misunderstood the question...i was thinking of the middle barrier
mike...the biggest ninny of us all