Help! Tap and drill...
 

Posted by Ken Leung at 1/24/2001 4:42 PM EST


Student on team #192, Gunn Robotics Team, from Henry M. Gunn Senior High School.



My team are trying to obtain a tap and drill that can fit a 3/8"-20 size... It doesn't seems like a standard size as we cannot find such size at Sears, OSH, Ace Hardware... Do anyone know any place in the Bay Area, California or even online where we can obtain such tap and drill set?

3/8 - 20 Tap
 

Posted by Joe Johnson at 1/24/2001 5:29 PM EST


Engineer on team #47, Chief Delphi, from Pontiac Central High School and Delphi Automotive Systems.


In Reply to: Help! Tap and drill...
Posted by Ken Leung on 1/24/2001 4:42 PM EST:



McMaster.com sells them page 2149 of the new catalog Part number 2595A817 cost $16.42

Joe J.

Re: 3/8 - 20 Tap
 

Posted by Samuel Lindhorst at 1/25/2001 1:00 AM EST


Engineer on team #240, Mach Vee, from Jefferson High School and Visteon.


In Reply to: 3/8 - 20 Tap
Posted by Joe Johnson on 1/24/2001 5:29 PM EST:



: McMaster.com sells them page 2149 of the new catalog Part number 2595A817 cost $16.42

: Joe J.


J & L Industrial they have an office in San Jose, but weborder the thing and get it tomorrow

800 521-9520


P/N TSP-14324K for a plug tap
P/N TSB-34327E for a bottoming tap

$10.40 either one