Metal strips on ends of bridge
 

Posted by Mike Fenton at 1/24/2001 7:33 PM EST


Engineer on team #121, Rhode Warrior, from Middletown High School and NUWC.



i looked at the dwgs and it seems that the 5 inch
metal strips hang over the platform ends by 3
inches. Does the part attached to the plywood go
over the carpet or under the carpet?

Re: Metal strips on ends of bridge
 

Posted by Brian at 1/24/2001 7:59 PM EST


Student on team #56, Robbe Xtreme, from Bound Brook High School and Ethicon Inc..


In Reply to: Metal strips on ends of bridge
Posted by Mike Fenton on 1/24/2001 7:33 PM EST:



It goes over the carpet

update 5... metal strip hanging out longer
 

Posted by Ken Leung at 1/25/2001 5:10 AM EST


Student on team #192, Gunn Robotics Team, from Henry M. Gunn Senior High School.


In Reply to: Metal strips on ends of bridge
Posted by Mike Fenton on 1/24/2001 7:33 PM EST:



According to team update 5, the metal strips are hanging out 4 inches from the platform ends instead of 3inches.