Programming Tutorials
 

Posted by Chris at 1/24/2001 11:30 PM EST


Student on team #295 from Granite Bay.



Does anyone know of any good tutorials for programming the controller? The PBasic manual from parallax isn't written specifically for the Innovation First controller, so it'd be nice to know if there's a more direct manual out there somewhere. Thanks.

Re: Programming Tutorials
 

Posted by Nate Smith at 1/25/2001 10:36 AM EST


Other on team #66, GM Powertrain/Willow Run HS, from Eastern Michigan University and GM Powertrain.


In Reply to: Programming Tutorials
Posted by Chris on 1/24/2001 11:30 PM EST:



: Does anyone know of any good tutorials for programming the controller? The PBasic manual from parallax isn't written specifically for the Innovation First controller, so it'd be nice to know if there's a more direct manual out there somewhere. Thanks.

There's the control system manual at Innovation First's site, but other than that, I dunno of any specific tutorials for this controller...I'd recommend reading over the default code(there's only really a small part that you have to worry about), and looking anything that doesn't make sense up in the PBASIC manual. Or if you have any specific questions, feel free to drop me an e-mail...

Nate