![]() |
Team Flags
We notice that some veteran teams have team flags to use for introduction before the matches. Are there any regulations on the size of flag we can use and on the pole that we use? I didn't see anything in the manual but I could have looked over it. Thanks.
|
Re: Team Flags
No regulations on flag, but please keep it reasonable! The MC has to wave the thing every match you're in, carry it to the sideline before the match starts, etc. You don't want something that's 50 lbs and 20 feet long!
|
Re: Team Flags
Our school district bought a flag for both us and 3310 (also in Rockwall ISD). It is fairly large (4'x6' I think) We have a telescopic pole but we keep the pole to only about 8' in height. The MC always comments that our flag is huge and kind of heavy but they never have issue with the weight, though swinging it around is a chore, even at that short length
As a prank as drivers, we always extended the pole about 6" each match until the pole is about 12' by eliminations, just for fun. In the stands, we extend the flag to its maximum length (about 18') and it is quite difficult to wave. |
Re: Team Flags
There are no official restrictions. However...
One year, a volunteer gatekeeper at the entrance to the Georgia Dome floor took it upon himself to impose a four-foot limit on flagpoles. There was no documentation for the "rule", but there was no getting around him. A number of teams hacksawed their flagpoles to meet the restriction, including at least one with a four-foot-tall flag. Poles that short are much harder to handle than longer ones, and they will not stay in the flag bins by the field without falling out, unless they're stuck in so far in that it's impossible to see whose flag they are. |
Re: Team Flags
Quote:
Far as I know there is no regulation on the size of flags (there's really no regulation about flags at all. All they ask is that you take responsibility for it otherwise it'll get thrown away at the end of the event). |
Re: Team Flags
1 Attachment(s)
MOE also has a very large flag, made by a parent many years ago. The pole is metal and separates into three sections for packing.
Fair warning, the MC's do gently complain at times about the size and weight of flags like this - Blair dubbed it the "uberflag". But if you have one, go for it! |
Re: Team Flags
Mostly, it's keep it reasonable. If you make a flag that the MCs won't want to wave, they'll probably find a way to not wave it.
Carol, I like the picture. Philadelphia Regional, 2011? |
Re: Team Flags
Quote:
|
Re: Team Flags
Quote:
|
Re: Team Flags
We have a cloth flag sewn by a parent several years ago, about 3' x 5', double-sided so the logo is always readable.
The pole is in 2 sections for packing, the lower section is long enough so the flag can sit in a trash can - this is how most fields store the flags between matches. The ends are finished for safety, and '1676' is written on it in a few places so the volunteers can immediately see which flag is ours (even when furled). |
Re: Team Flags
A devil's pitchfork is so much easier to lug around.
|
Re: Team Flags
Make sure it is built to be able to be tipped upside down. Our team has a large flag and once it was given to the MC on the field and when he tipped it, it fell apart.
|
Re: Team Flags
We had a student and their mother make our flag a couple years ago. Similar to other posts it's about 3x5 and we use a small curtain rod as the pole makes it look a bit nicer. It's really light weight as well.
|
Re: Team Flags
Nothing beats a hockey stick for a flag pole :D . Lightweight, and just the right size.
|
Re: Team Flags
::rtm:: hey guys its ash from team 2051 im borrowing my friend from 3260s account cause i dont remember mine... anyways does anyone know like the limitations and what not for the flag? or a website i can design the flag on??? (than get it made...) ::safety:: thanks ahead of time :]
|
Re: Team Flags
We have had some home-made flags in the past, but a couple years ago we had one professionally made. I can't remember the company but it was online.
*edit, found the webiste:http://www.flagsnpennants.com/ We needed to upload the graphics (in .eps format) and they printed it on the flag fabric. I believe it cost us about $100.00 for a 3'x5' flag. They sent a proof first before they made it, took about 2 weeks to get it. Hope this helps. |
Re: Team Flags
Quote:
|
Re: Team Flags
In my experience, a 3x5 flag is "the right size" for FRC events. Its big enough to be impressive, without being so big its unwieldy.
|
Re: Team Flags
1712 has a moderately large flag that was made early in our history. However, it was made mostly of felt, so it's quite hefty. One of our MCs last year did a bit where she "curled" the flag rather than waiving it during some of our match intros.
|
Re: Team Flags
Team 1100 has a very large flag (about 4ft by 6 ft as well). We use a long piece of steel pipe to hold our flag.
|
Re: Team Flags
Who needs a flag...
http://www.flickr.com/photos/frc2175...7633550448876/ But in all honesty its a bit unwieldy at times. |
Re: Team Flags
Flags aren't part of the game so there are some teams that make things even as crazy as an axe made out of subway fare cards (cough tech knights cough). Most teams just do flags though... It'd be pretty cool to see some new ideas.
|
Re: Team Flags
Quote:
|
Re: Team Flags
Quote:
|
Re: Team Flags
thanks guys for the ideas! anymore would be appreciated.. cause those helped some but werent what i was looking for..soooo anymore websites and such would be appreciated! :]
|
Re: Team Flags
Quote:
Please read the thread, where people explain that there are no restrictions, but keep in mind that the MCs have to wave it and carry it, and do so with many flags all day. So, keep it reasonable. Other than that, go crazy! Also, google is your friend. |
Re: Team Flags
Quote:
|
| All times are GMT -5. The time now is 08:34. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi