Distance to flange from carpet?
 

Posted by Justin Ridley at 1/27/2001 10:47 AM EST


Engineer on team #221, MI Roboworks, from Michigan Technological University.



We've got our bridge built, but I'd like to check a dimension to make sure we've got everything ok. What is the distance from the carpet to the bottome point of one of lower side flanges. . .when the goal is in the tilted position. The flange is not parrallel to the floor at this position so measure the lowest point. Thanks a lot, this will be a big help.


Justin Ridley - MI Roboworks