Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   2001 (http://www.chiefdelphi.com/forums/forumdisplay.php?f=40)
-   -   1.25" or 1.7" ? (http://www.chiefdelphi.com/forums/showthread.php?t=12352)

archiver 23-06-2002 23:47

1.25" or 1.7" ?
 
Posted by rebecca at 1/28/2001 12:14 PM EST


Student on team #192, gunn robotics team, from gunn high school.



I could be mistaken, but I beleive the hang bar in last years game was made from a piece of 1 1/4" Schedule 40 aluminum pipe. However the outside diameter of the pipe was something close to 1.7."

So I am wondering...these dimensions also apply to the two grab bars on the bottom of the goals?

rebecca

archiver 23-06-2002 23:47

Re: 1.25" or 1.7" ?
 
Posted by Denny McBride at 1/28/2001 3:46 PM EST


Other on team #379, Robocats, from Girard High School.


In Reply to: 1.25" or 1.7" ?
Posted by rebecca on 1/28/2001 12:14 PM EST:



The gab bars are 1.625 minimum.





All times are GMT -5. The time now is 01:41.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi