Chief Delphi - VersaPlanetary 1/2" Hex Output Shaft Kit Hole Size

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - VersaPlanetary 1/2" Hex Output Shaft Kit Hole Size (http://www.chiefdelphi.com/forums/showthread.php?t=123591)

xForceDee

23-12-2013 20:28

VersaPlanetary 1/2" Hex Output Shaft Kit Hole Size

I am looking at using the a versa planetary to drive some wheels. I plan to attach them via this hex shaft. I want to model this setup in CAD and my problem is I cannot find the information about the diameter and pitch of the the threaded hole at the edge of the shaft. I would like to use a bolt and some washers to retain the wheel. If anyone has this information that would be awesome! Thanks

geomapguy

23-12-2013 20:36

Re: VersaPlanetary 1/2" Hex Output Shaft Kit Hole Size

Quote:

Originally Posted by xForceDee (Post 1316527)

I'm not sure but I would assume it is a 1/4-20 tapped hole.

I'm sure someone else will chime in with the right answer.

Paul Copioli

23-12-2013 20:52

Re: VersaPlanetary 1/2" Hex Output Shaft Kit Hole Size

Quote:

Originally Posted by geomapguy (Post 1316530)

I'm not sure but I would assume is a 1/4-20 tapped hole.

I'm sure someone else will chime in with the right answer.

Yep, 1/4-20. We will have layout drawings soon with all pertinent layout information.

geomapguy

23-12-2013 21:00

Re: VersaPlanetary 1/2" Hex Output Shaft Kit Hole Size

Quote:

Originally Posted by Paul Copioli (Post 1316534)

Yep, 1/4-20. We will have layout drawings soon with all pertinent layout information.

Thanks for the confirmation Paul

All times are GMT -5. The time now is 17:19.