Chief Delphi - Lead screw drive calculations

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Lead screw drive calculations (http://www.chiefdelphi.com/forums/showthread.php?t=123831)

phargo#1018

30-12-2013 20:30

Lead screw drive calculations

1 Attachment(s)

For the 2013 robot design, we were intending to use a lead screw to position the disk shooter platform within the robot body.

While the geometry is unique to the robot we were intending to build, the sizing calculations might be of interest to others.

Hopefully, this will help someone else in the future!!

All times are GMT -5. The time now is 17:28.