Chief Delphi - 1/2" wide rectangular tubing

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - 1/2" wide rectangular tubing (http://www.chiefdelphi.com/forums/showthread.php?t=123853)

Andrew Lawrence

31-12-2013 22:54

1/2" wide rectangular tubing

I'm looking for aluminum tubing that's 1/2" wide, specifically in the size of 2x.5x.125. Does anyone know if such an extrusion exists, and if so, where I could get it? I've done some research and it seems extremely difficult to find, but I swear I've seen it before.

David Guzman

31-12-2013 23:01

Re: 1/2" wide rectangular tubing

We get all our aluminum from Alro. Unfortunately, they don't have 1/2 X 2. They have 1/2 x 1 or 3/4 x 1 1/2.

http://www.alro.com/datacatalog/010-...um.pdf#page=51

Here is all they have:

http://www.alro.com/datacatalog/metalsguidecatalog.aspx

DELurker

31-12-2013 23:22

Re: 1/2" wide rectangular tubing

Quote:

Originally Posted by Andrew Lawrence (Post 1319032)

I'm not seeing anything in the Ryerson stock list that's 2"x1/2"x1/8" wall aluminum. That wall is pretty thick for the width (50%). Are you sure of your dimensions?

All times are GMT -5. The time now is 15:29.