Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   2001 (http://www.chiefdelphi.com/forums/forumdisplay.php?f=40)
-   -   lost GYRO wires.. (http://www.chiefdelphi.com/forums/showthread.php?t=12388)

archiver 23-06-2002 23:54

lost GYRO wires..
 
Posted by Anton Abaya at 1/30/2001 11:43 PM EST


Coach on team #419, Rambots, from UMass Boston / BC High and NONE AT THE MOMENT! :(.



umm, what can we do to compensate for the lack of the wire that connects to the gyros... i've been wanting to play with those suckers...

any one got ideas?

-anton

archiver 23-06-2002 23:54

solder
 
Posted by Joe Ross at 1/31/2001 3:03 AM EST


Engineer on team #330, Beach Bot, from Hope Chapel Academy and NASA/JPL , J&F Machine, and Raytheon.


In Reply to: lost GYRO wires..
Posted by Anton Abaya on 1/30/2001 11:43 PM EST:



: umm, what can we do to compensate for the lack of the wire that connects to the gyros... i've been wanting to play with those suckers...

Unless I am really blind, FIRST has never given us connetors for the gyros. you need to solder (gasp!) wires to the connector on the gyro.



archiver 23-06-2002 23:54

ken..u said we had em?
 
Posted by Anton Abaya at 1/31/2001 9:37 AM EST


Coach on team #419, Rambots, from UMass Boston / BC High and NONE AT THE MOMENT! :(.


In Reply to: solder
Posted by Joe Ross on 1/31/2001 3:03 AM EST:



: : umm, what can we do to compensate for the lack of the wire that connects to the gyros... i've been wanting to play with those suckers...

: Unless I am really blind, FIRST has never given us connetors for the gyros. you need to solder (gasp!) wires to the connector on the gyro.

or maybe we're both blind (me and joe)

-antonymous

archiver 23-06-2002 23:54

Nate says, yes we do...
 
Posted by Nate Smith at 1/31/2001 9:30 PM EST


Other on team #66, GM Powertrain/Willow Run HS, from Eastern Michigan University and GM Powertrain.


In Reply to: ken..u said we had em?
Posted by Anton Abaya on 1/31/2001 9:37 AM EST:



: : : umm, what can we do to compensate for the lack of the wire that connects to the gyros... i've been wanting to play with those suckers...

: : Unless I am really blind, FIRST has never given us connetors for the gyros. you need to solder (gasp!) wires to the connector on the gyro.

: or maybe we're both blind (me and joe)

: -antonymous

Page B-2 of the robot section(Kit of Parts List)
Connector for yaw rate sensor - 3pin, 24AWG x 12" - Red Container, Loose

Nate


archiver 23-06-2002 23:54

Re: lost GYRO wires..
 
Posted by Michael W. Allender at 1/31/2001 11:30 PM EST


Engineer on team #48, Delphi ELITE, from Warren G. Harding and Delphi Automotive Systems.


In Reply to: lost GYRO wires..
Posted by Anton Abaya on 1/30/2001 11:43 PM EST:



I believe that FIRST provided the GYRO connector/wires in the packet of information handed out at the kickoff - they were not in the kit. The seat and window motor connector/wires were in there also.


: umm, what can we do to compensate for the lack of the wire that connects to the gyros... i've been wanting to play with those suckers...

: any one got ideas?

: -anton




All times are GMT -5. The time now is 01:44.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi