LabVIEW Update Failure
 

I just got the new LabVIEW at kickoff and am having issues getting it working. After installing all of the NI updates, the getting started page is not "'for FRC" and WPI Robotics Library is not available. Does anyone have any idea what the problem might be?

Re: LabVIEW Update Failure
 

Did you install the FRC update? Download it from ni.com/frc, unzip (might need password) and install then restart.

Re: LabVIEW Update Failure
 

PROBLEM SOLVED


I did install the FRC updates. I just installed the wrong ones. In the past I have always found the updates by googling "FRC labview updates", the page that comes up is last years updates not this ones.

Re: LabVIEW Update Failure
 

Hey I'm having the same problem but I installed the patches (from the NI update service) after having started LabVIEW once, could that be the reason I'm not seeing the FRC custom interface?

Re: LabVIEW Update Failure
 

What you can get from the built-in NI update procedure is not the FRC updates. Start at http://www.usfirst.org/roboticsprogr...ical-resources and follow the links to the FRC 2014 Update Suite.

Re: LabVIEW Update Failure
 

Yeah, I found that out after looking more closely yesterday, got it all up and running now, thanks!

Re: LabVIEW Update Failure
 

What password is required? I'm trying to install the update, but it's asking for a password and I have no idea what it might be.

Re: LabVIEW Update Failure
 

The password is 3Zones2Goals1Alliance
It can be located on the national instruments first website.

Re: LabVIEW Update Failure
 

3Zones2Goals1Alliance!

Re: LabVIEW Update Failure
 

Yep, don't forget the exclamation mark on the end.