Chief Delphi - Speed of KOP Chassis

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Kit & Additional Hardware (http://www.chiefdelphi.com/forums/forumdisplay.php?f=55)

- - Speed of KOP Chassis (http://www.chiefdelphi.com/forums/showthread.php?t=124019)

Flimsor

04-01-2014 16:57

Speed of KOP Chassis

Hello,

I'm trying to get a general idea for the length of a scoring cycle, and wanted to use the speed of a standard KOP chassis as reference. I was wondering if anyone knew how fast it is?

Thanks

Daniel_LaFleur

04-01-2014 17:04

Re: Speed of KOP Chassis

Quote:

Originally Posted by Flimsor (Post 1320547)

Hello,

I'm trying to get a general idea for the length of a scoring cycle, and wanted to use the speed of a standard KOP chassis as reference. I was wondering if anyone knew how fast it is?

Thanks

This'll depend on how many assists teams go for and whether they toss the ball over the Truss or not.

Truthfully, I expect (once defense is calculated in) 30-45 second cycle times during seeding rounds and ~30 second cycles during the finals.

Flimsor

04-01-2014 17:06

Re: Speed of KOP Chassis

Quote:

Originally Posted by Daniel_LaFleur (Post 1320554)

I figured I could factor that in as additional time based on about how long it takes for a standard KOP chassis to go across the field.

roystur44

04-01-2014 17:12

Re: Speed of KOP Chassis

The speed of the KOP depends on the number of motors, the gearing and how well the driver controls the robot. Figure 8-12 ft/second on a single speed gearbox

Flimsor

04-01-2014 17:15

Re: Speed of KOP Chassis

Quote:

Originally Posted by roystur44 (Post 1320561)

The speed of the KOP depends on the number of motors, the gearing and how well the driver controls the robot. Figure 8-12 ft/second on a single speed gearbox

Great, thanks a lot!

All times are GMT -5. The time now is 00:44.