Chief Delphi
Page 3 of 5 < 12 3 45 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Robot in 3 Days Robot Reveals (http://www.chiefdelphi.com/forums/showthread.php?t=124264)

TVwazhere 08-01-2014 02:20
Re: Robot in 3 Days Robot Reveals
 
I'd like to see AndyMark's finished robot. I doubt they'll be able to (they probably have other commitments)

Xavbro 08-01-2014 02:21
Re: Robot in 3 Days Robot Reveals
 
Quote:
Originally Posted by Dan Richardson (Post 1323601)
I think team Ri3D 1.0 would love to play a match against the other teams. But in the spirit of Gracious Proffesionalism we'd really hate to embarrass them when our robot shows them up. #OhSnapNoHeDidnt

/edit As some people tend to be very literal, this post was meant to be taken in jest. And that the other teams may see this and they in turn would "throw down." Thus ending in a match sometime in the off season.
Challenge Accepted!!

Team O-Ryon would love for that. We'd say give AndyMark an extra 24 hours or so to finish their robot and some time for everyone to make bumpers and we all could meet up for a friendly competition.

AllenGregoryIV 08-01-2014 03:03
Re: Robot in 3 Days Robot Reveals
 
Quote:
Originally Posted by Xavbro (Post 1323626)
Challenge Accepted!!

Team O-Ryon would love for that. We'd say give AndyMark an extra 24 hours or so to finish their robot and some time for everyone to make bumpers and we all could meet up for a friendly competition.
Since 3 of the 72 hour robots were built in Texas it seems only fair that we should host this event. :) Texas Robot Round-Up in August or Robot Remix in Oct/Nov?

IRI would be acceptable as well.

Joe Johnson 08-01-2014 09:41
Re: Robot in 3 Days Robot Reveals
 
Quote:
Originally Posted by GBK (Post 1323425)
Now the GDC can issue a rule change that will make some of what they did invalid, like adding a End Game that can not be added to any of these bots. ...
Stop. This is an "if pigs had wings, they could fly" type statement.

Could the GDC reverse field and add an End Game? Yes, they would be within there "rights" as a GDC. Are they going to? NO! The GDC is not going to add an End Game. It is not going to happen.

Don't waste time and energy on things that are very very very very VERY unlike and also impossible to plan for anyway because there is always going to be SOME End Game that will make ANY design choice the wrong one.

Move on.

Joe J

Joe Johnson 08-01-2014 09:47
Re: Robot in 3 Days Robot Reveals
 
Quote:
Originally Posted by Anupam Goli (Post 1323564)
These crews built their robots with the intention of not sticking to the rule limitations. If you noticed, they used illegal electronics too.
BOOM DONE.'s goal was to build a robot that could pass inspection. The only violation I know of is the indicator light that the field uses to tell the status of the CRIO. Other than that, I think we could pass inspection.

Joe J.

Tom Bottiglieri 08-01-2014 10:21
Re: Robot in 3 Days Robot Reveals
 
All of these entries were very impressive. I really like these videos as they give you an idea of how a completed robot interacts with the field and game pieces early on in the season and makes planning for strategy a little less hand wavy.

Thank you to the teams for all of the hard work that you've put in over the past 3 days. You are doing a ton to help the community and inspire both students and other mentors. Keep fighting the good fight!

JB987 08-01-2014 10:25
Re: Robot in 3 Days Robot Reveals
 
Quote:
Originally Posted by Tom Bottiglieri (Post 1323718)
All of these entries were very impressive. I really like these videos as they give you an idea of how a completed robot interacts with the field and game pieces early on in the season and makes planning for strategy a little less hand wavy.

Thank you to the teams for all of the hard work that you've put in over the past 3 days. You are doing a ton to help the community and inspire both students and other mentors. Keep fighting the good fight!
+1! And by the way, Dr. Joe, what tape/wrap did you use on your acquisition wands (torro sticks)?

TedG 08-01-2014 10:27
Re: Robot in 3 Days Robot Reveals
 
Good job all of you, very impressive!
This will help a lot of teams head in a productive direction.

Not necessarily copy a design, but inspire them to think of somthing they hadn't considered.

Cheers to Ri3D teams

GBK 08-01-2014 11:11
Re: Robot in 3 Days Robot Reveals
 
Quote:
Originally Posted by Joe Johnson (Post 1323701)
Stop. This is an "if pigs had wings, they could fly" type statement.

Could the GDC reverse field and add an End Game? Yes, they would be within there "rights" as a GDC. Are they going to? NO! The GDC is not going to add an End Game. It is not going to happen.

Don't waste time and energy on things that are very very very very VERY unlike and also impossible to plan for anyway because there is always going to be SOME End Game that will make ANY design choice the wrong one.

Move on.

Joe J
Sorry you don't agree with my opinion on this. But it has not changed and based on posts in previous threads that I had not read prior to today, I am not the only one. However if this type of thing helps even one team then you got what you were going for. Cad drawings and a BOM will be even more helpful for teams.

AdamHeard 08-01-2014 11:13
Re: Robot in 3 Days Robot Reveals
 
Quote:
Originally Posted by geomapguy (Post 1323408)
cutting sign.....like cut, we're done

EDIT: The lighting seemed really bad for that scene
Glad I was wrong, rewatched on my computer (originally on phone) and I can just see that 2nd finger.

Joe Johnson 08-01-2014 11:16
Re: Robot in 3 Days Robot Reveals
 
Quote:
Originally Posted by JB987 (Post 1323723)
+1! And by the way, Dr. Joe, what tape/wrap did you use on your acquisition wands (torro sticks)?
More details to come but the best stuff I know for this kind of task is Abrasion-Resistant Natural Latex Rubber from McMaster

I like the 1/16th thick rough on one side stuff (86085K2)

Again, more details to come.

Joe J.

Andy Baker 08-01-2014 11:21
Re: Robot in 3 Days Robot Reveals
 
While we at Team AndyMark chose not to complete our Robot in 3 Days, we did get much CAD completed.

Here is a .STEP file and a Solidworks Pack and Go .zip file for folks to see.

At this point at AndyMark, our main focus is to support our customer base and keep operations humming. We also work with some local FRC teams, and those teams will be helping us complete and test some of our prototypes and designs. However, we aren't going to force the students to use the designs we made during Ri3D. Due to weather, the students have not been able to decide upon an overall concept. Hopefully, our design work may be able to help them come to a conclusion.

Sincerely,
Andy Baker

Racer26 08-01-2014 11:45
Re: Robot in 3 Days Robot Reveals
 
Count me among the people who'd love to see:

A) Team AndyMark's robot finished, regardless of how much extra time they need.
B) All 6 72-hour robots (Ri3D 1.0, AndyMark, Boom.Done., O-RYON, TeamJVN, and TeamCopioli) in one place, with a field, playing a MATCH (or possibly a small tournament) of Aerial Assist, before the end of build season.

TedG 08-01-2014 12:35
Re: Robot in 3 Days Robot Reveals
 
Quote:
Originally Posted by Racer26 (Post 1323779)
Count me among the people who'd love to see:

A) Team AndyMark's robot finished, regardless of how much extra time they need.
B) All 6 72-hour robots (Ri3D 1.0, AndyMark, Boom.Done., O-RYON, TeamJVN, and TeamCopioli) in one place, with a field, playing a MATCH (or possibly a small tournament) of Aerial Assist, before the end of build season.
Great idea, or somthing like that, maybe some mock matches with mock officials that know the rules, robots and teams to play out real scenarios.
It would be great to watch some actual matches play out, this would help teams figure out what will actually happen at competitons without learning the hard way.

How many times have we said "hey I didn't forsee that happening" or "you can do that?" :ahh:

Alex Cormier 08-01-2014 12:40
Re: Robot in 3 Days Robot Reveals
 
Quote:
Originally Posted by Joe Johnson (Post 1323706)
BOOM DONE.'s goal was to build a robot that could pass inspection. The only violation I know of is the indicator light that the field uses to tell the status of the CRIO. Other than that, I think we could pass inspection.

Joe J.
Will this actually be a FRC's teams competition robot?


All times are GMT -5. The time now is 08:30.
Page 3 of 5 < 12 3 45 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi