Chief Delphi - Ball dimensional variability

Page 3 of 3

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Ball dimensional variability (http://www.chiefdelphi.com/forums/showthread.php?t=124293)

G Fawkes

13-01-2014 15:03

Re: Ball dimensional variability

Can more teams please post their measured ball diameter?

We measured ours with what we felt was robust fill and got 25". We also noticed it shrinks ~0.25" over a few hours.

mblake31

15-01-2014 06:28

Re: Ball dimensional variability

We measured our ball shortly after inflating to what we thought was a "normal" inflation, and got 24".
It's since been left overinflated for about a week, and after filling it until the zipper just closes, we measured 25.75". Unlike you guys in the States, though, we've had a week of 90 degree days, so possibly that's a factor.

Jared Russell

15-01-2014 10:25

Re: Ball dimensional variability

FWIW: We cannot zip our ball shut if blown up above 26" diameter. It seems underinflated below 25" diameter.

All times are GMT -5. The time now is 03:51.

Page 3 of 3

Show 100 post(s) from this thread on one page