Chief Delphi - Build Blitz Robot Reveal

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Build Blitz Robot Reveal - Team Copioli (http://www.chiefdelphi.com/forums/showthread.php?t=124440)

Redo91

11-01-2014 13:56

Re: Build Blitz Robot Reveal - Team Copioli

I saw posted somewhere here on CD(maybe in the 2014 VEXPro product release thread) that the pulley is toleranced such that 2 9mm belts will fit on the 15mm pulley.

Unless I imagined seeing it.

Chris is me

11-01-2014 14:05

Re: Build Blitz Robot Reveal - Team Copioli

Quote:

Originally Posted by Switzer96 (Post 1325512)

Not sure if I'm missing something but I was going through Team Copioli's CAD files, and it appears as if they are using a 15mm timing pulley (P/N 217-3230) to drive two belts out of the gearbox. The belts are not in the design, so I am trying to figure out how two would fit with what I'm assuming is a 9mm timing belt from vex pro. Are they using a different pulley/belt or would this be able to fit somehow?

I hope that more information on assembly will be released soon for teams looking into using Vex Pro's versa chassis system.

The 15mm pulley is a bit wider than that, and the 9mm belts are a bit narrower than that, allowing for two "9mm" belts to fit on a "15mm" Vex pulley.

Switzer96

11-01-2014 14:10

Re: Build Blitz Robot Reveal - Team Copioli

Ok, I found where this was discussed in the Versa Chassis thread. RC responded to a similar question - http://www.chiefdelphi.com/forums/sh...1&postcount=11

-The pulleys can be expanded with spacers.

Aren_Hill

15-01-2014 10:53

Re: Build Blitz Robot Reveal - Team Copioli

Quote:

Originally Posted by Switzer96 (Post 1325558)

The 42T and 60T pulleys can we widened with spacers. The 18T, 24T, 30T, 36T pulley come in two widths, the wider one can accommodate two 9mm wide belts. (we toleranced things to make this work).

All times are GMT -5. The time now is 14:38.

Page 2 of 2

Show 100 post(s) from this thread on one page