Re: CRio II will not communicate
 

Thanks y'all.

I'll try these suggestions tonight and if not successful will call NI.

We normally don't start with these activities until week 6, so this is real progress.

Re: CRio II will not communicate
 

We had the same issue. Using the old 2013 imaging tool, but putting the 2014 image file (.zip file) in C:\WindRiver\WPILib\cRIO_Images and selecting it in the FRC Imaging Tool resolved the issue.

My guess is that the 2014 Imaging tool is flawed or has a bug.

Re: CRio II will not communicate
 

Yes. This has worked for us.

Also, you should try changing the ip of your computer (just in case you have the same address as the cRIO), and DISABLE ALL OTHER NETWORK ADAPTERS!! If you have wi-fi on, it doesn't usually reconnect.

Also, if this doesn't work, go to device manager, go to the settings for your network adapter, and turn off all power saving features.

Re: CRio II will not communicate
 

Can you confirm that you're following these steps:

http://wpilib.screenstepslive.com/s/...ging-your-crio

Brad

Re: CRio II will not communicate
 

Here's some feedback: switching to Safe mode for an initial format took care of my problem. Thanks Dave and everyone else.

Onward in this great journey...

Re: CRio II will not communicate
 

Yes. This is the exact site we used.

Re: CRio II will not communicate
 

We have re-established connection to the cRIO but now we are getting an error that says, "Timeout while waiting for reboot"