Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)
-   -   2 Pneumatic cylinders on one solenoid. (http://www.chiefdelphi.com/forums/showthread.php?t=124691)

protoserge 01-28-2014 02:02 PM
Re: 2 Pneumatic cylinders on one solenoid.
 
Quote:
Originally Posted by Tytus Gerrish (Post 1333653)
the pneumatics downstream of the primary regulator that get's set to 60PSI are of no significant concern for inspection.
All pneumatics are of concern for inspection. Please explain what you mean by this statement.

Tytus Gerrish 01-28-2014 03:19 PM
Re: 2 Pneumatic cylinders on one solenoid.
 
everything downstream of the primary regulator is up to the teams. provided that it's rated to at-least 125psi by its manufacturer, isn't extrenuous tubing, does not present a hazard, and holds air long enough to demonstrate the power-on test. it passes.

martin417 01-28-2014 03:25 PM
Re: 2 Pneumatic cylinders on one solenoid.
 
Quote:
Originally Posted by Tytus Gerrish (Post 1333751)
everything downstream of the primary regulator is up to the teams. provided that it's rated to at-least 125psi by its manufacturer, isn't extrenuous tubing, does not present a hazard, and holds air long enough to demonstrate the power-on test. it passes.
Not true. There are MANY rules pertaining to the components downstream of the regulator, all of which must be you must bu in compliance or you don't pass.


All times are GMT -5. The time now is 02:25 PM.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi