Chief Delphi - Red Light Black Jaguar

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- CAN (http://www.chiefdelphi.com/forums/forumdisplay.php?f=185)

- - Red Light Black Jaguar (http://www.chiefdelphi.com/forums/showthread.php?t=124753)

xandao

16-01-2014 15:17

Red Light Black Jaguar

Hi guys, we're having a problem with a black jaguar, the led starts flashing red when we comunnicate to computer. When the jaguar is just connected to power distribution, it flashes yellow, that's ok, but when we enable driver station or try to configure CAN it starts flashing red.
We checked the limit swicth and voltage, and after resetting its says; "gate fault".
Does anyone have a ideia of what's is going on? mus we chance the mosfet?
thank you

Joe Ross

16-01-2014 15:35

Re: Red Light Black Jaguar

Yes, that's indicating a short inside the jaguar, probably in one of the mosfets. If it was in your kit this year, it is still under warranty.

xandao

17-01-2014 06:08

Re: Red Light Black Jaguar

Quote:

Originally Posted by Joe Ross (Post 1328156)

Yes, that's indicating a short inside the jaguar, probably in one of the mosfets. If it was in your kit this year, it is still under warranty.

Ok, I get it. Thank you for the help Joe!

Ideal_Nerd

05-02-2015 22:09

Re: Red Light Black Jaguar

We had the same problem last year. open the jag and clean of the board. There may be some aluminum shavings in there.

Poseidon5817

05-02-2015 23:26

Re: Red Light Black Jaguar

Cover your electronics with a blanket when you drill :D

cgmv123

05-02-2015 23:31

Re: Red Light Black Jaguar

Quote:

Originally Posted by Poseidon1671 (Post 1439074)

Cover your electronics with a blanket when you drill :D

AND use a vacuum.

All times are GMT -5. The time now is 20:16.