Chief Delphi - team JVN catapult?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - team JVN catapult? (http://www.chiefdelphi.com/forums/showthread.php?t=124848)

bs7280

18-01-2014 15:42

team JVN catapult?

For those of us with out access to the software required to view the CAD files posted by the teams on the build blitz group, could someone please tell us the specs of the team JVN catapult. We particularly want to know: the distance from the tubing mount to the axis the catapult rotates on; the location of the tubing mount to the frame, relative to the axis, and the amount of tubing used.

If anyone could help us out with regards to answering any of these, it would be be greatly appreciated.

Ether

18-01-2014 16:24

Re: team JVN catapult?

Quote:

Originally Posted by bs7280 (Post 1328916)

For those of us with out access to the software required to view the CAD files...

FreeCAD

Aroki

18-01-2014 16:31

Re: team JVN catapult?

Quote:

Originally Posted by Ether (Post 1328933)

FreeCAD

Students/teachers can get free installs of Autodesk Inventor from here and first teams also get PTC creo and Solidworks I believe. My guess is that they don't have a computer that can run the software.

swwrobotics

18-01-2014 19:02

Re: team JVN catapult?

Quote:

Originally Posted by Ether (Post 1328933)

FreeCAD

THANK YOU!!!!!!!!!!!!

cbale2000

18-01-2014 19:55

Re: team JVN catapult?

Quote:

Originally Posted by Aroki (Post 1328935)

... first teams also get PTC creo and Solidworks I believe. My guess is that they don't have a computer that can run the software.

Do you know where teams get that software? I've looked through TIMS and the kit and I can't seem to find anything about it anywhere.

EricH

18-01-2014 19:59

Re: team JVN catapult?

Quote:

Originally Posted by cbale2000 (Post 1329027)

Do you know where teams get that software? I've looked through TIMS and the kit and I can't seem to find anything about it anywhere.

Try the Virtual Kit, under Software Downloads.

team222badbrad

18-01-2014 22:17

Re: team JVN catapult?

2 Attachment(s)

These drawings I did up for my team that we used in the prototyping phase. They may not include all the specs you want, but it's a start and I didn't have to do any extra work to get them to you... :D

Knufire

19-01-2014 02:37

Re: team JVN catapult?

Quote:

Originally Posted by cbale2000 (Post 1329027)

Do you know where teams get that software? I've looked through TIMS and the kit and I can't seem to find anything about it anywhere.

Here's Solidworks: http://www.solidworks.com/sw/educati...gn-contest.htm

All times are GMT -5. The time now is 02:06.