Drivers station doesn't fit on E12 classmate
 

Hello, we got a new E12 classmate through First Choice. We imaged it with E12_DRV_2014_171213.7z. The screen on the E12 doesn't look very good. The adapter is "Generic PnP monitor on standard VGA Graphics adapter" and its resolution is fixed at 800 x 600. The driver's station program is too wide. I'm trying the driver I found out https://ctl.app.box.com/shared/mlqvvza3ar/1/180337509, but did I get the right image and has anyone else run across this?

Update: The driver fixed the screen. I'm going to leave this post here in case it helps somebody else.

Re: Drivers station doesn't fit on E12 classmate
 

We had the same issue.
Getting the right video driver fixed it.

Re: Drivers station doesn't fit on E12 classmate
 

several people reported issues and needed to install a video driver here: http://forums.usfirst.org/showthread...e-Rookie-teams

Re: Drivers station doesn't fit on E12 classmate
 

FYI, if you have the same issue on the E11 Classmate, the drivers on the CTL website for the E11 will not install. It errors out with a "not compatible hardware" message.

The video driver for the E12 Classmate did install fine on the E11 Classmate and fixed the 800x600 resolution issue.

Posting here incase the E12's were sold out, and you ended up with an E11 like Me. :)

Re: Drivers station doesn't fit on E12 classmate
 

Thank you very much for that link to the graphics driver! It fixed the resolution on our team's E12 classmate. :)