Banebot Wheel CAD Models
 

To my surprise, when surfing the google, the banebots website and chiefdelphi, I could not find any reliably accurate models that did not involve registering on some website. I think it would be of great benefit to all FIRST teams looking at possibly buying and using them if members of the community could post some accurate models of these wheels. Specifically, the one I wish I had now is the 3-7/8" wheel with a 1/2" hex mount but I think all models would be helpful. So if you have a moment and the files on your computer, please share them on this thread. Thanks!

Re: Banebot Wheel CAD Models
 

There isn't a whole lot to these. The OD and width is given on the Banebots website along with the bore type. You can create your own model if a few seconds. It may not be perfect but will probably be sufficient for what you need it for.

Re: Banebot Wheel CAD Models
 

Here is a Banebot wheel posed on 3DContentCentral.com.

http://www.3dcontentcentral.com/down...=171&id=229748

You can download it in 14 file formats. Marie

Re: Banebot Wheel CAD Models
 

I made this 3-7/8" wheel model for Pioneers in Engineering, so it has a 3/4" bore instead of a 1/2" hex. The folder contains an .ipt from Inventor 2014 and a step file.

https://www.dropbox.com/sh/otp6woq93m2jbvw/zvzs6filzB