Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)
-   -   How many cameras can the robot have? (http://www.chiefdelphi.com/forums/showthread.php?t=125035)

Rafa12 21-01-2014 18:49

How many cameras can the robot have?
 
I´ve searched on the game manual but it doesn´t specify if how many, does that mean as much as we want??:confused:

yash101 21-01-2014 18:51

Re: How many cameras can the robot have?
 
I do not think that there is a camera limit. However, there is weight, power draw and available bandwidth that will haunt you if you have more than ~2-3 cameras!

Rafa12 21-01-2014 18:55

Re: How many cameras can the robot have?
 
thanks ;)

yash101 21-01-2014 19:00

Re: How many cameras can the robot have?
 
Quote:

Originally Posted by Rafa12 (Post 1330438)
thanks ;)

You're welcome! What competitions are you going to? Are you attending the Phoenix Regionals?

Rafa12 21-01-2014 19:08

Re: How many cameras can the robot have?
 
No, there will be a regional here in mexico :)

SoftwareBug2.0 22-01-2014 03:23

Re: How many cameras can the robot have?
 
Quote:

Originally Posted by yash101 (Post 1330436)
I do not think that there is a camera limit. However, there is weight, power draw and available bandwidth that will haunt you if you have more than ~2-3 cameras!

Weight: A small camera is under a pound. You would not run into this limit until you had like 100 cameras.

Power draw: I've read the power that a webcam uses is about 125 mW. If you limit your cameras power consumption to 40W, which is less than a single motor can use, then power isn't a limit until you have 320 cameras.

Bandwidth: Cameras can be configured not to send data back to the driver station. Therefore the available bandwidth can support an unlimited number of cameras.

Al Skierkiewicz 22-01-2014 07:56

Re: How many cameras can the robot have?
 
Has no one remembered the cost limit? BTW, all cameras even those not used for robot function, must be securely mounted to the robot.
Duct Tape is not a fastener.

Whippet 22-01-2014 09:44

Re: How many cameras can the robot have?
 
Quote:

Originally Posted by Al Skierkiewicz (Post 1330675)
Has no one remembered the cost limit? BTW, all cameras even those not used for robot function, must be securely mounted to the robot.
Duct Tape is not a fastener.

Since the camera is a KOP item, isn't it exempt from the cost limit?

Nate Laverdure 22-01-2014 09:52

Re: How many cameras can the robot have?
 
Quote:

Originally Posted by Whippet (Post 1330708)
Since the camera is a KOP item, isn't it exempt from the cost limit?

There was a maximum quantity of 1 per team for the AXIS M1013 on FIRSTChoice. Doesn't this mean that only 1 unit can be exempted from the total cost limit?

cgmv123 22-01-2014 12:23

Re: How many cameras can the robot have?
 
Quote:

Originally Posted by Nate Laverdure (Post 1330711)
There was a maximum quantity of 1 per team for the AXIS M1013 on FIRSTChoice. Doesn't this mean that only 1 unit can be exempted from the total cost limit?

R10 Blue box says KOP items are exempt in any quantity.

Al Skierkiewicz 22-01-2014 12:37

Re: How many cameras can the robot have?
 
The question wasn't "how many KOP cameras".

bulbajackel 22-01-2014 16:46

Re: How many cameras can the robot have?
 
There are limits as in outside cost and bandwidth used. You can have 1000 cameras that were 1 penny each and all displayed one pixel so little bandwidth is used and that will be fine.

dubiousSwain 22-01-2014 18:20

Re: How many cameras can the robot have?
 
9001 cameras

brycen66 22-01-2014 20:01

Re: How many cameras can the robot have?
 
You can have an indefinite number of cameras, the bandwidth is not an issue if you switch between camera feeds and/or do all image processing on board. I have heard of multiple teams using a raspberry pi for image recognition.

BBray_T1296 22-01-2014 20:14

Re: How many cameras can the robot have?
 
Quote:

Originally Posted by dubiousSwain (Post 1330942)
9001 cameras


You would need one hell of an Ethernet switch to support 9001 cameras (perhaps an entire server rack)

cgmv123 22-01-2014 20:32

Re: How many cameras can the robot have?
 
Quote:

Originally Posted by brycen66 (Post 1331011)
You can have an indefinite number of cameras, the bandwidth is not an issue if you switch between camera feeds and/or do all image processing on board. I have heard of multiple teams using a raspberry pi for image recognition.

Quote:

Originally Posted by BBray_T1296 (Post 1331020)
You would need one hell of an Ethernet switch to support 9001 cameras (perhaps an entire server rack)

No one ever said the cameras had to do anything.

BBray_T1296 22-01-2014 20:36

Re: How many cameras can the robot have?
 
Quote:

Originally Posted by cgmv123 (Post 1331037)
No one ever said the cameras had to do anything.

Intimidation is a powerful force

mhos1997 22-01-2014 20:37

Re: How many cameras can the robot have?
 
Might as well make them a weight filler to get to the 120 lb limit :D :D :D

BBray_T1296 22-01-2014 20:46

Re: How many cameras can the robot have?
 
Has anybody else considered this for FRC use? :P

Pigeon guided missile system

faust1706 22-01-2014 21:58

Re: How many cameras can the robot have?
 
Quote:

Originally Posted by BBray_T1296 (Post 1331045)
Has anybody else considered this for FRC use? :P

Pigeon guided missile system

I'm surprised teams that have eyes on their robot (I'm looking at you 1986 and 931-from 2011) but cameras there are well if they have weight. I think that'd be cool, but that's just be.

Using cameras to get more weight? Do teams really add stuff to add to their weight? I feel the density of a camera would make it very inefficient. But hey, it sure would look cool.


All times are GMT -5. The time now is 04:50.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi