Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   solenoid button help (http://www.chiefdelphi.com/forums/showthread.php?t=125257)

Mark McLeod 26-01-2014 09:10
Re: solenoid button help
 
2 Attachment(s)
It's easier to show, so here's an example (attachment 1) using a Select (found under Programming -> Comparison), and a Feedback node that remembers what the last value set was.


The second attachment shows the alternate method that just uses Case statements. The extra Case boxes at the bottom are just there to show what the False cases look like.

Team3993Tom 26-01-2014 19:44
Re: solenoid button help
 
Quote:
Originally Posted by Mark McLeod (Post 1332626)
It's easier to show, so here's an example (attachment 1) using a Select (found under Programming -> Comparison), and a Feedback node that remembers what the last value set was.


The second attachment shows the alternate method that just uses Case statements. The extra Case boxes at the bottom are just there to show what the False cases look like.
thank you for all the help, I was able to get it all to work. if you know anything about mecanum drive, http://www.chiefdelphi.com/forums/sh...d.php?t=125051


All times are GMT -5. The time now is 20:52.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi