Chief Delphi - X and Y Axis Confusion

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - X and Y Axis Confusion (http://www.chiefdelphi.com/forums/showthread.php?t=125373)

alexander.h

28-01-2014 10:04

X and Y Axis Confusion

Hello! I know that this question might seem silly to some, but when you move the joystick right and left, is it moving along the X or Y axis? I would think that it would be the X axis value that changes from left to right, but I keep forgetting. Could someone please tell me?

billbo911

28-01-2014 10:13

Re: X and Y Axis Confusion

You have it correct. Think of X as the cross supports in a Steering wheel, and Y as your foot on the Gas peddle.

That might help.

plnyyanks

28-01-2014 14:02

Re: X and Y Axis Confusion

Exactly. If you look at the joystick from above, the axes will look just like a standard coordinate system, with the max/min of each axis being ± 1:

All times are GMT -5. The time now is 09:43.