Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)
-   -   Double Solenoid VOLTAGE? (http://www.chiefdelphi.com/forums/showthread.php?t=125426)

akash992391 29-01-2014 10:27

Double Solenoid VOLTAGE?
 
Does it matter what voltage the double solenoid (electric valve) receives?:confused: :confused: :confused: :confused: :confused:

kevin.li.rit 29-01-2014 10:28

Re: Double Solenoid VOLTAGE?
 
Yes, if it is a 12V double solenoid, give it 12V. If it is a 24 V solenoid give it 24 Volts.

akash992391 29-01-2014 10:33

Re: Double Solenoid VOLTAGE?
 
We have a bunch of 12V batteries, but only 24V Solenoids. Is there an way we can make this work.

kevin.li.rit 29-01-2014 10:38

Re: Double Solenoid VOLTAGE?
 
Quote:

Originally Posted by akash992391 (Post 1334184)
We have a bunch of 12V batteries, but only 24V Solenoids. Is there an way we can make this work.

Use the solenoid breakout which plugs into the 24V section of the power distribution board.

http://www.andymark.com/product-p/am-0868.htm

Rstrzelecki 29-01-2014 11:13

To test 24v solenoids our team spliced together 2 battery plugs with a fuse in between. It works but isn't the safest thing.

markgryzwa 29-01-2014 11:27

Re: Double Solenoid VOLTAGE?
 
You should be using the +24V supply on the Power Distribution Board. It is the same supply that the CRIO uses.

goofy173 06-02-2014 23:21

Re: Double Solenoid VOLTAGE?
 
Probably too late now but use http://www.andymark.com/product-p/am-0875.htm so you don't have to choose.


All times are GMT -5. The time now is 05:51.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi