Chief Delphi - How to upload our code to the cRIO?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - How to upload our code to the cRIO? (http://www.chiefdelphi.com/forums/showthread.php?t=125452)

jalozinski

29-01-2014 19:15

How to upload our code to the cRIO?

We have the Driver Station opened and our code prepped. How do we upload the code to the robot? (We're using Netbeans and Java)

IIRC, when we edited and saved the code in Netbeans and recompiled, it would effect the robot, so I think that it had something to do with the plugin. (or netbeans was consistently building to the same filepath and the driver station software was passing it to the cRio, idk)

s

sergioCorral842

29-01-2014 19:18

Re: How to upload our code to the cRIO?

Quote:

Originally Posted by jalozinski (Post 1334450)

Pressing the run button (F6) on netbeans should download the new code to the robot, assuming you are connected to the robot properly through wifi or ethernet.

yash101

29-01-2014 21:10

Re: How to upload our code to the cRIO?

Press the play button to debug on the cRIO. I believe there is a deploy button to get the cRIO image downloaded to Flash!

Joe Ross

29-01-2014 22:27

Re: How to upload our code to the cRIO?

I'd recommend reading through the documentation: http://wpilib.screenstepslive.com/s/3120/m/7885

All times are GMT -5. The time now is 02:33.