PG71 Gearmotor am-0914
 

Hello! In my hands, I have a PG71 Gearmotor am-0914 and I'd like to know how we connect it electrically. Could someone please help us?

Re: PG71 Gearmotor am-0914
 

According to AM's site:
•Electrical Connection Geometry: 3/16" wide spade connectors (2)
so you could try some female 3/16" spade connectors

EDIT
You said electrically and I responded with mechanically... It just runs off 12 Volts so just like any other motor.

You can solder your wire directly to the terminals as well. We've had success doing it that way.

The terminals aren't that large, so spade connectors can pop off rather easily. Whatever you use, add strain relief.

Re: PG71 Gearmotor am-0914
 

Soldering is your best bet, with a nice piece of heat-shrink tubing to go over the connection. Hasn't failed me yet!

Re: PG71 Gearmotor am-0914
 

If you're going to solder to the motor give this thread a quick read first. It's got some good tips from Al Skierkiewicz.

http://www.chiefdelphi.com/forums/sh...ing+to+mot or

Re: PG71 Gearmotor am-0914
 

You can connect it to Jaguar, Victor, or Talon motor controller (1 or 2 motors per controller), or Spike relay, per Paragraph 4.8.21 Rule R51 Table 4-4 Page 62 of the 2014 Game Manual (listed in Table as am-2161 motor).

Re: PG71 Gearmotor am-0914
 

You can also contact FIRST Quebec, they have several mentors who can come help you out.