Chief Delphi - Fans are no longer working

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Fans are no longer working (http://www.chiefdelphi.com/forums/showthread.php?t=125508)

Q Branch 4327

30-01-2014 18:13

Fans are no longer working

We had 6 fans hooked up on our robot. 4 on Talons, 2 on Victors. They appear to have burnt out, but we don't know why. The wiring is correct, and we tried powering it directly by a battery and still nothing. Any suggestions?

xXhunter47Xx

30-01-2014 19:16

Re: Fans are no longer working

Do the speed controllers still work?
If so, have you touched them while they were running?

Q Branch 4327

30-01-2014 20:41

Re: Fans are no longer working

The speed controllers do still work, and I haven't touched them while running because they always had the fans on them.

Tem1514 Mentor

31-01-2014 11:53

Re: Fans are no longer working

I would check the voltage rating on the fans and make sure they are rated for 12 volts.

I hope you had the fans powered from input side of the speed controller and not motor side. Just one of those things to check.

All times are GMT -5. The time now is 05:38.