Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Team Update 1-31-14 (http://www.chiefdelphi.com/forums/showthread.php?t=125550)

magnets 31-01-2014 15:23

Team Update 1-31-14
 
Our vendor thought the intent with the HIGH GOALS was to have the outside corners powder coated red or blue to match the rest of the HIGH GOAL. This is contrary to the instructions we provided the vendor, but we feel the schedule risk to correct this issue is not worth the potential benefit. We have updated the images throughout the manual to reflect the current situation. We sincerely apologize for any inconvenience teams experience because of this change.

I'm not sure what it means...

dellagd 31-01-2014 15:29

Re: Team Update 1-31-14
 
It just means their manufacturer messed up. Not really a big deal, the high goals just are aesthetically slightly different.

Steven Donow 31-01-2014 15:29

Re: Team Update 1-31-14
 
Quote:

Originally Posted by magnets (Post 1335413)
Our vendor thought the intent with the HIGH GOALS was to have the outside corners powder coated red or blue to match the rest of the HIGH GOAL. This is contrary to the instructions we provided the vendor, but we feel the schedule risk to correct this issue is not worth the potential benefit. We have updated the images throughout the manual to reflect the current situation. We sincerely apologize for any inconvenience teams experience because of this change.

I'm not sure what it means...

The images in the manual previously showed parts of the high goal(specifically, the square around the arcs on the ends) not having their corners powdercoated. That was FIRST's intention in the design. The vender they contracted to make them did not due that, and instead powdercoated the entire thing. They modified the manual to reflect that.

Caleb Sykes 31-01-2014 15:33

Re: Team Update 1-31-14
 
2 Attachment(s)
If you compare these two pictures, you can see the difference at the corners of the HIGH GOALS. The updated game manual specifications now include the colored corners, whereas the field shown was how the GDC originally intended the field to look.

Andy A. 31-01-2014 15:33

Re: Team Update 1-31-14
 
Compare Fig. 2-12 in the Arena section of the manual to all the (new) field renders.

Probably not a game impacting difference.

Alex Cormier 31-01-2014 15:48

Re: Team Update 1-31-14
 
http://frc-manual.usfirst.org/Updates/0#term%20158

That's very interesting. I don't see it as a big deal.

Tungrus 31-01-2014 15:51

Re: Team Update 1-31-14
 
Just use black duct tape, no one will notice it and no one will complain about it!

Gregor 31-01-2014 15:53

Re: Team Update 1-31-14
 
Quote:

Originally Posted by Tungrus (Post 1335429)
Just use black duct tape, no one will notice it and no one will complain about it!

Or just leave it as is. No one will notice and no one will complain about it!

joelg236 31-01-2014 16:12

Re: Team Update 1-31-14
 
Quote:

Originally Posted by Gregor (Post 1335432)
Or just leave it as is. No one will notice and no one will complain about it!

Yeah. I really hope nobody's design solely relied on not having powder coating on the corners.

Whippet 31-01-2014 16:53

Re: Team Update 1-31-14
 
Well, there goes our bare aluminum corner tracking full field navigation system...

Bryce2471 31-01-2014 17:01

Re: Team Update 1-31-14
 
Quote:

Originally Posted by Whippet (Post 1335475)
Well, there goes our bare aluminum corner tracking full field navigation system...

Made my day!

SenorZ 31-01-2014 18:07

Re: Team Update 1-31-14
 
Quote:

Originally Posted by Whippet (Post 1335475)
Well, there goes our bare aluminum corner tracking full field navigation system...

All that off-season, "just in case it happens this year", work for nothing!

Ivan_Yuri 01-02-2014 17:29

Re: Team Update 1-31-14
 
Quote:

Originally Posted by SenorZ (Post 1335500)
All that off-season, "just in case it happens this year", work for nothing!

The kicker here is, we initially had someone suggest that but was rejected for being extremely too unreliable and difficult-to-control. We don't usually reject ideas without at least trying it, but this did kinda hit one of the exception clauses for that almost on the mark....


All times are GMT -5. The time now is 21:32.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi