Chief Delphi - Lazy-Susan Style Pivot

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Lazy-Susan Style Pivot (http://www.chiefdelphi.com/forums/showthread.php?t=125689)

jzeiders

02-02-2014 15:04

Lazy-Susan Style Pivot

My team was looking to connect to pieces of 1" channel in a way that allows one of them to pivot parallel to the other one. The original plan was to use a lazy-susan/turntable but were unable to find one small enough.
Any Suggestions?

kmusa

02-02-2014 15:14

Re: Lazy-Susan Style Pivot

Quote:

Originally Posted by jzeiders (Post 1336379)

Could you provide more details? For instance, I've seen lazy susan hardware in the 3" range.

-Karlis

mrnoble

02-02-2014 15:17

Re: Lazy-Susan Style Pivot

The Igus slewing rings might do what you want. We picked one up from the First Choice items that is about 4" diameter, if I recall correctly. If you can't find one, send me a PM and we'll see if we can get it to you.

EricH

02-02-2014 15:18

Re: Lazy-Susan Style Pivot

McMaster goes down pretty far in terms of diameter. http://www.mcmaster.com/#turntables/=qit6yb

All times are GMT -5. The time now is 17:14.